PL-500SM-N SERIES
Plastic Shell Auto-Coupling Connectors
14 pole capacity miniature circular connector
for overmolding
PL-500SM-N FEATURES
Ideal for front-panel instrumentation and hand-held equipment, the compact
and cost effective PL-500 Series is designed to meet the efficient packaging
demands of portable electronic devices
Packaging (intuitive, compact, configurable)
• Pulse-Lok® auto-latch / mating confirmation
• Miniature .520” diameter circular shell
• Up to 14 contact positions
Performance (for harsh environments)
• Water proof (IP-67 rated)
• Steam, EtO, & Gamma sterilizable
• Chemical resistant housing
• Up to 5,000 mating cycles (with std.
Contacts)
• Factory terminated, overmolded
cable assemblies for enhanced flex
and strain relief
• 14 standard color combinations
• Multiple and proprietary keying options
• Available as an overmolded cable assembly
• Custom configurations available
SPECIFICATIONS
Mechanical
Environmental
Electrical (see below)
Mating Life: 5,000 cycles min.
Contact Resistance: < 10 milliohms*
Mating Cycles: 20K cycles max
Retention Force:
• Operating Temp: -20C to +85C
• Mated Connectors: 25 lbs. Minimum
• Cable to Connector: to 30 lbs. typical
• Backshell to Connector: 50 lbs.
Minimum
• Moisture Resistance: to IP-67 (encapsulated)
• Sterilizable: gamma, EtO & Autoclave
• Chem. Resistance: common OR cleaning solvents
* post conditioning
Material
Connector Housing: Nylon 12
Flex Reliefs: Thermoplastic Rubber
Contacts: Brass / BeCu,
Gold Plate per MIL-G-45204
TABLE A:
STANDARD CONTACT CONFIGURATIONS & SPECIFICATIONS
Contact Size
Pin f (mm)
Operating
Operating
Current Max
.9 A
Contact
Number of Poles
Max Wire Gauge
Voltage max
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
Resistance
< 14m ohms
< 14m ohms
< 6m ohms
< 6m ohms
< 6m ohms
< 6m ohms
< 6m ohms
< 6m ohms
< 6m ohms
< 6m ohms
< 2m ohms
14
10
8
0.5
28
28
22
22
22
22
22
22
22
22
16
Up to 14
contact positions
0.5
1.2 A
1.8 A
2.1 A
2.1 A
2.4 A
2.4 A
3.0 A
3.0 A
3.0 A
7.0 A
0.7
7
0.7
6
0.7
5
0.7
4
0.7
3
0.7
2
0.7
1
0.7
1
1.5
Custom contact inserts are available. Consult factory.
STANDARD HOUSING OPTIONS
In-Line Receptacle Assembly
.520 f
Panel-Mount Receptacle Assembly
In-Line Plug Assembly
.520 f
Mounts from
back of panel
to achievce an
IP-67 seal
- .320 typ
2.05
2.00
.625 f
Shown with overmolded strain relief
(Refer to PL Series Overmolding Guide)
Shown with Overmolded Strain Relief
(Refer to PL Series Overmolding Guide)
Panel thickness range = .063 to .125
In-Line Plug Kit (for overmolding)
In-Line Receptacle Kit (for overmolding)
Panel-Mount Receptacle
Rear
Mount
1.43
1.02
1.35
Select this component from Table B
Select this component from Table B
Select this component from Table B
Connector housings are illustrated in blue with gray couplers and backshells. Standard color is black on black. See our online configurator for color
options at: www.aldenproducts.com/configurator
* All dimensions shown in inches except where indicated
Phone: 508-427-7000
For additional information about this, or any other Alden product, please
contact an Amphenol Alden specialist today.
Fax: 508-583-0164
www.amphenolalden.com
1
© 20012 Amphenol Alden Products Company “Pulse-Lok” is a trademark of Alden Products Company US Patents 5,067,909 , 5,167,522 , & International Patents apply. Other Patents Pending.
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
