Series 57 Quick-Release Universal
Zero-Insertion-Force DIP Test Socket
FEATꢁRES
ꢀ
ꢀ
ꢀ
•ꢀ AcceptsꢀDevicesꢀonꢀ0.300ꢀtoꢀ0.600ꢀ[7.62ꢀtoꢀ15.24]ꢀCenters
•ꢀ AllꢀPinꢀCountꢀSocketsꢀgoꢀintoꢀPCBꢀwithꢀeitherꢀ0.300ꢀorꢀ0.600ꢀ[7.62ꢀorꢀ15.24]ꢀCenters
•ꢀ Quick-releaseꢀHandleꢀSwingsꢀDownꢀtoꢀOpenꢀContactsꢀforꢀDeviceꢀInsertion;ꢀReleasingꢀ
HandleꢀAutomaticallyꢀReturnsꢀtoꢀCloseꢀontoꢀDeviceꢀLeads
ꢀ
ꢀ
•ꢀ HandleꢀMountedꢀonꢀeitherꢀRight-ꢀorꢀLeft-handꢀSide
•ꢀ SolderꢀintoꢀPCBsꢀorꢀPluggedꢀintoꢀAnyꢀSocket
ORDERING INFORMATION
XX-X 57 X-X X
GENERAL SPECIFICATIONS
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
•ꢀ STANDARD SOCKET BODY:ꢀBlackꢀULꢀ94V-0ꢀGlass-filledꢀPolyphenyleneꢀSulfideꢀ(PPS)
•ꢀ HIGH-TEMP SOCKET BODY:ꢀnaturalꢀcolorꢀPolyetheretherketoneꢀ(PEEK)
•ꢀ HANDLE:ꢀStainlessꢀSteel
•ꢀ HANDLE KNOB:ꢀBrassꢀ360,ꢀ1/2-hardꢀ(noꢀKnobꢀonꢀLoopꢀhandle)
•ꢀ CONTACT MATERIAL:ꢀBeCuꢀ172ꢀperꢀQQ-C-553;ꢀSpinodal;ꢀBeNiꢀ360,ꢀ1/2-hard
•ꢀ ALL BeCu CONTACTS:ꢀ50μꢀ[1.27μ]ꢀmin.ꢀNiꢀunderꢀplateꢀperꢀQQ-N-290,ꢀoverꢀplatedꢀwithꢀ
200μꢀ[5.08μ]ꢀmin.ꢀmatteꢀSnꢀperꢀASTMꢀB545-97;ꢀ–OR–ꢀ200μꢀ[5.08μ]ꢀmin.ꢀ90/10ꢀSn/
PbꢀperꢀMIL-T-10727-11ꢀ10μꢀ[0.25μ]ꢀmin.ꢀAuꢀperꢀMIL-G-45204
•ꢀ SPINODAL CONTACT PLATING:ꢀ50μꢀ[1.27μ]ꢀmin.ꢀNiB
Plating
ꢀ 0ꢀ=ꢀSnꢀoverꢀNi
ꢀ 0TLꢀ=ꢀSn/PbꢀoverꢀNi
ꢀ 1ꢀ=ꢀAuꢀoverꢀNi
ꢀ 6ꢀ=ꢀNiBꢀ(Spinodal)
ꢀ 8ꢀ=ꢀHi-tempꢀSocket
Termination
ꢀ 1ꢀ=ꢀSolderꢀPinꢀTail
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
45° Handle Options
•ꢀ HIGH-TEMPERATURE BeNi CONTACT PLATING:ꢀ50μꢀ[1.27μ]ꢀNiB
•ꢀ CONTACT CURRENT RATING:ꢀ1ꢀamp
ꢀ 0ꢀ=ꢀLongꢀHandle,ꢀRightꢀSide
ꢀ 1ꢀ=ꢀLongꢀHandle,ꢀLeftꢀSide
ꢀ 2ꢀ=ꢀShortꢀHandle,ꢀRightꢀSide
ꢀ 3ꢀ=ꢀShortꢀHandle,ꢀLeftꢀSide
ꢀ 4ꢀ=ꢀLoopꢀHandle,ꢀRightꢀSideꢀ*
ꢀ 5ꢀ=ꢀLoopꢀHandle,ꢀLeftꢀSideꢀ*
•ꢀ INSULATION RESISTANCE: 1000 MΩꢀmin.
•ꢀ DIELECTRIC WITHSTANDING VOLTAGE:ꢀ1000ꢀVAC
•ꢀ LIFE CYCLE:ꢀ25,000ꢀtoꢀ50,000ꢀcycles
•ꢀ OPERATING TEMPERATURE:ꢀmin.ꢀ-67°Fꢀ[-55°C];ꢀmax.ꢀ221°Fꢀ[105°C]ꢀforꢀSnꢀplating,ꢀ
302°Fꢀ[150°C]ꢀforꢀAuꢀplating,ꢀ392°Fꢀ[200°C]ꢀforꢀNiBꢀplating,ꢀ482°Fꢀ[250°C]ꢀforꢀhigh-
tempꢀsocket
Series
Row-to-Row Spacingꢀ(btm)
ꢀ 3ꢀ=ꢀ0.300ꢀ[7.62]
ꢀ 6ꢀ=ꢀ0.600ꢀ[15.24]ꢀ(Std)
ꢀ
ꢀ
•ꢀ RETENTION FORCE (closed):ꢀ55g/pinꢀbasedꢀonꢀaꢀ0.020ꢀ[0.51]ꢀdia.ꢀtestꢀlead
•ꢀ ACCEPTS LEADS:ꢀ0.015-0.035ꢀ[0.38-0.89]ꢀwide,ꢀ0.110-0.280ꢀ[2.79-7.11]ꢀlong
Pins
ꢀ 24,ꢀ28,ꢀ32,ꢀ36,ꢀ40,ꢀ42,ꢀ44,ꢀ48
MOꢁNTING CONSIDERATIONS
ꢀ
•ꢀ SeeꢀSOCKET FOOTPRINTꢀbelow
*ꢀHi-TempꢀSocketꢀOnly
Handle
Dim “H1”
Dim. “H2”
Dim “Hꢀ”
Longꢀw/Knob 0.568ꢀ[14.43] 0.300ꢀ[7.62] 0.471ꢀ[11.96]
Shortꢀw/ꢀKnob 0.317ꢀ[8.05] 0.400ꢀ[10.16] 0.252ꢀ[6.40]
Loopꢀ(noꢀKnob) 0.270ꢀ[6.86]
0.193ꢀ[4.90]
0.405ꢀ[10.29]
ALL DIMENSIONS: INCHES [MILLIMETERS]
CꢁSTOMIZATION: ARIES SPECIALIZES IN CꢁSTOM DESIGN AND PRODꢁCTION.
SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGꢁRATIONS CAN BE
FꢁRNISHED, DEPENDING ON QꢁANTITY.
ALL TOLERANCES: 0.005 [0.1ꢀ] ꢁNLESS OTHERWISE SPECIFIED
FITS TEST SOCKET RECEPTACLE XX-6556-XX, SEE DATA SHEET 1000ꢀ
CONSꢁLT FACTORY FOR OTHER SIZES AND CONFIGꢁRATIONS
ARIES RESERVES THE RIGHT TO CHANGE PRODꢁCT GENERAL SPECIFICATIONS
WITHOꢁT NOTICE
PRINTOꢁTS OF THIS DOCꢁMENT MAY BE OꢁT-OF-DATE AND SHOꢁLD BE
CONSIDERED ꢁNCONTROLLED
•
2609 Bartram Road Bristol, PA 19007-6810 USA
10019
Rev. 1.5
1 of 1
•
TEL 215-781-9956 FAX 215-781-9845
•
WWW.ARIESELEC.COM INFO@ARIESELEC.COM