Datasheet > 312151--1

312151--1

更新时间： 2024-09-26 01:22:31

品牌	Logo	应用领域
MACOM		/
页数	文件大小	规格书
5页	142K
描述
Feed- Through Head Assembly

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

312151--1 数据手册

Instruction Sheet

Feed-Through Head Assembly 58443-1

For Discrete Wire MTA-156 Receptacles

408-9607

20 DEC 10 Rev C

Locating

Pawl

Feed

Slide

Insert

Housing

Wire Subassembly

Retainer

Rod Inserter

Adjuster

Wire Inserter

(Hidden)

Figure 1

Features of the head assembly (shown in Figure 1)

and functions are as follows:

1. INTRODUCTION

Feed--Through Head Assembly 58443--1 is used to

terminate discrete wires onto MTA--156 Receptacles

640599--[ ] (for wire size 18 AWG) and Receptacles

640604--[ ] (for wire size 26 AWG) with a maximum

insulation diameter of 2.41 mm [.095 in.]. Read these

instructions thoroughly before using the head.

Wire inserter—forces the wire into the two slotted

beams of the contact. Note that it provides support for

the contact beams when applying insertion force on

the wire.

Rod inserter adjuster—is a piston for the wire inserter

and regulates wire inserter travel.

The head must be mounted onto one of the following

tools (for operating procedure for the tool, refer to the

instructions packaged with the tool):

Feed slide—automatically positions the receptacle

after each termination.

— Pistol Grip Manual Handle Assembly 58074--1

(408--6790)

— Electric Power Unit 931800--1 (409--5746)

— Pistol Grip Pneumatic Handle Assembly

58075--1 (408--6789)

Locating pawl—aligns the receptacle for insertion,

and retains it during termination. The locating pawl is

sometimes referred to as the “anti--backup pawl.”

Insert housing—holds the receptacle in place in

relation to the wires.

— Pneumatic Power Bench Assembly 58338--1

(408--9393)

Wire subassembly retainer—holds the wires in place

in relation to the receptacle.

All numerical values in this instruction sheet are

in metric units [with U.S. customary units in

brackets]. Dimensions are in millimeters [and

inches]. Figures are not drawn to scale.

NOTE

3. TEST CRIMP AND HEAD ADJUSTMENTS

3.1. Test Crimp

Reasons for reissue of this instruction sheet are

provided in Section 8, REVISION SUMMARY.

1. Make a termination according to Section 4,

Steps 1 through 6. If the receptacle cannot be

inserted into the head, or if the receptacle is too

loose in the head, adjust the insert housing

according to Paragraph 3.2.

2. DESCRIPTION

The head serves as a guide and support for the

receptacle during termination.

TOOLING ASSISTANCE CENTER 1-800-722-1111

PRODUCT INFORMATION 1-800-522-6752

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.tycoelectronics.com

E2010 Tyco Electronics Corporation, Berwyn, PA

1 of 5

TE logo and Tyco Electronics are trademarks.

LOC B

*Trademark. Other products names, logos, or company names might be trademarks of their respective owners.

12 3 4 5

中文翻译

下载PDF

与312151--1相关器件

型号	品牌	获取价格	描述	数据表
312153-1	TE	获取价格	Read these and all referenced instructions thoroughly before using the head.
312153-1	MACOM	获取价格	Terminating Head 58247- 1 For MTA- 156 Receptacle Connectors Using Discrete Wire
312154-1	MACOM	获取价格	Terminating Head 58247- 1 For MTA- 156 Receptacle Connectors Using Discrete Wire
312154-1	TE	获取价格	Read these and all referenced instructions thoroughly before using the head.
312154--1	MACOM	获取价格	Feed- Through Head Assembly
312-156	ETC	获取价格	CIRC-O-GIDE, SNAP-IN BUTTON STYLE CARD GUIDE
312156-1	TE	获取价格	Pistol Grip Pneumatic Handle Assembly
312157-1	TE	获取价格	Pistol Grip Pneumatic Handle Assembly
312158-2	TE	获取价格	Reasons for reissue of this instruction sheet are provided in Section 8, REVISION SUMMARY.
312159-1	TE	获取价格	Reasons for reissue of this instruction sheet are provided in Section 8, REVISION SUMMARY.

与312151--1相关文章

塔塔电子与力积电达成技术转让协议，携手建设印度首座晶圆厂
2024-09-29

2
英特尔震撼发布：128核心256线程的至强6性能核处理器
2024-09-29

5
SK海力士量产12层HBM3E，容量高达36GB
2024-09-27

11
意法半导体传感器驱动Sphere，开启沉浸式电影新时代
2024-09-27

15

产品中心

服务支持

精选活动

关于我们

帮助中心

312151--1

312151--1 数据手册

与312151--1相关器件

与312151--1相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

312151--1

312151--1 数据手册

与312151--1相关器件

与312151--1相关文章

您还可以找

您在本页遇到什么问题？