Datasheet > 302563

302563

更新时间： 2024-01-06 13:00:49

品牌	Logo	应用领域
MACOM		/
页数	文件大小	规格书
8页	357K
描述
Remove assembly pins from mounting lugs as shown in Figure 1

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

302563 数据手册

This instruction sheet provides instructions on product

application and Maintenance and Inspection for

Insulation Piercing COPALUM Terminal and Splice

Crimping Heads (68081 and 68082) used in

Pneumatic Tool 69015. These crimping heads are

used to crimp COPALUM Terminals and Splices on

No. 8 thru 6 film insulated solid aluminum or copper

wire or stranded copper wire.

Basic instructions on the use of these heads, wire

preparation, etc. are provided in Section 2,

INSTRUCTIONS. Section 3 features terminal or

splice Crimp Inspection Procedure. Section 4

contains a Maintenance and Inspection Procedure

which will enable you to establish a tool certification

program.

Figure 1

2. Remove assembly pins from mounting lugs as

shown in Figure 1.

Crimping heads are coated with preservative to

prevent runt and corrosion. Wipe this preservative

from heads, particularly from the crimping areas. For

further instructions relative to the 69015 tool, refer to

the instructions packaged with the tool.

3. Pull toggle arm forward and insert toggle lever

shank of crimping head all the way into hole in

toggle arm until toggle lever snaps in place. See

Figure 1.

4. Align holes in crimping head links with holes in

mounting lugs.

5. Insert assembly pins.

6. Connect air supply to tool 586 to 689 kPa

[85 to 11 psi].

Reasons for reissue are provided in Section 5,

REVISION SUMMARY.

7. Tool is now ready for operation.

1. Remove assembly pins.

2. Lower head away from mounting lugs, twist

head 90° and remove from toggle arm.

3. Reinstall assembly pins.

1. Select the correct crimping head for the wire

size being used. Wire size and the insulation

piercing crimp symbol ( ) appear on one jaw as

shown in Figure 1.

Solid aluminum or copper (or a combination of both)

and stranded copper conductors may be crimped in

the same wire barrel under the following conditions:

12 3 4 5 6 7 8

中文翻译

下载PDF

与302563相关器件

型号	品牌	获取价格	描述	数据表
30258	WINCHESTER	获取价格	COMPOSITE OUTLINE
3025888	PHOENIX	获取价格	Terminal Block Accessory,
30259	WINCHESTER	获取价格	COMPOSITE OUTLINE
3025956	PHOENIX	获取价格	Modular Terminal Block, 10A, 1.5mm2
3025969	PHOENIX	获取价格	Modular Terminal Block, 34A, 6mm2
3025-A	ETC	获取价格	KNOB
3025W3PAT99P40X	CONEC	获取价格	D Subminiature Connector
3025W3SAR99F40X	CONEC	获取价格	D Subminiature Connector
3025W3SAT99P40X	CONEC	获取价格	D Subminiature Connector
3025W3SXK99A20X	CONEC	获取价格	D Subminiature Connector