Low-Cost Molded
Industrial VRS Magnetic
Speed Sensors
DESCRIPTION
Low-Cost Molded VRS Sensors are designed for use in OEM
(Original Equipment Manufacturer) applications.
The output signal of a VRS sensor is an ac voltage that varies
in amplitude and wave frequency as the speed of the
monitored device changes, and is usually expressed in peak to
peak voltage (Vp-p).
Passive VRS (Variable Reluctance Speed) Magnetic Speed
sensors are simple, rugged devices that do not require an
external voltage source for operation.
One complete waveform (cycle) occurs as each target passes
the sensor’s pole piece. If a standard gear were used as a
target, this output signal would resemble a sine wave if viewed
on an oscilloscope.
A permanent magnet in the sensor establishes a fixed
magnetic field. The approach and passing of a ferrous metal
target near the sensor’s pole piece (sensing area) changes the
flux lines of the magnetic field, dynamically changing its
strength. This change in magnetic field strength induces a
current into a coil winding which is attached to the output
terminals.
Honeywell also offers VRS sensors for general purpose, high
output, power output, high resolution and high temperature, as
well as hazardous location applications.
FEATURES
POTENTIAL APPLICATIONS
•
•
•
•
•
•
•
Self-powered operation
Direct conversion of actuator speed to output frequency
Simple installation
•
Engine RPM (revolutions per minute) measurement on
aircraft, automobiles, boats, buses, trucks and rail
vehicles
Motor RPM measurement on drills, grinders, lathes and
automatic screw machines
Motor RPM measurement on precision camera, tape
recording and motion picture equipment
Process speed measurement on food, textile, paper,
woodworking, printing, tobacco and pharmaceutical
industry machinery
No moving parts
•
•
•
Designed for use over a wide range of speeds
Adaptable to a wide variety of configurations
Customized VRS products for unique speed sensing
applications
Housing diameters: 0.505 in, 7/16 in, 0.292 in, 1/4 in
Housing materials/styles: plastic smooth or threaded
Terminations: Crimp, pin, preleaded
Output voltages: 10 Vp-p to 190 Vp-p
•
•
•
•
•
•
Motor speed measurement of electrical generating
equipment
Speed measurement of pumps, blowers, mixers, exhaust
and ventilating fans
•
•
•
Flow measurement on turbine meters
Wheel-slip measurement on autos and locomotives
Gear speed measurement