Datasheet > 2W-MOD2

2W-MOD2

更新时间： 2024-11-15 05:56:07

品牌	Logo	应用领域
SYSTEMSENSOR		光电
页数	文件大小	规格书
2页	184K
描述
Photoelectric Smoke Detectors

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

2W-MOD2 数据手册

Photoelectric

Smoke Detectors

System Sensor’s i3^™series smoke detectors represent

signiﬁcant advancement in conventional detection.

The i3 family is founded on three principles: installation

ease, intelligence, and instant inspection.

Features

• Plug-in detector line, mounting base included

Installation ease. The i3 line redeﬁnes installation ease with its

plug-in design. This allows an installer to pre-wire the bases included

with the heads. The large wire entry port and in-line terminals

provide ample room for neatly routing the wiring inside the base.

The base accommodates a variety of back box mounting methods,

as well as direct mounting with drywall anchors. To complete the

installation, i3 heads plug in to the base with a simple Stop-Drop ’N

Lock^™action.

• Large wire entry port

• In-line terminals with SEMS screws

• Mounts to octagonal and single-gang backboxes, 4-square

backboxes, or direct to ceiling

• Stop-Drop ’N Lock attachment to base

• Removable detector cover and chamber

• Built-in remote maintenance signaling

• Drift compensation and smoothing algorithms

• Simplified sensitivity measurement

• Wide angle, dual color LED indication

• Loop testing via EZ Walk feature

Intelligence. i3 detectors oﬀer a number of intelligent features

to simplify testing and maintenance. Drift compensation and

smoothing algorithms are standard with the i3 line to minimize

nuisance alarms. Two-wire i3 detectors needing cleaning can

generate a remote maintenance signal, when connected to the

2W-MOD2 loop test/maintenance module, or to a panel equipped

with the i3 protocol. This signal is indicated by LEDs located at the

module and the panel. The SENS-RDR, a wireless device, displays the

sensitivityof i3 detectors in terms of percent per-foot-obscuration.

• Built-in test switch

Instant inspection. The i3 series provides wide-angle red and

green LED indicators for instant inspection of the detector’s

condition: normal standby, out-of-sensitivity, alarm, or freeze trouble.

When connected to the 2W-MOD2 loop test/maintenance module

or a panel with the i3 protocol, the EZ Walk loop test feature is

available on two-wire i3 detectors. This feature veriﬁes the initiating

loop wiring by providing LED status indication at each detector.

Agency Listings

S911

ꢀ011446

7272-1209:210

290-01-E

209ꢀ

中文翻译

下载PDF

与2W-MOD2相关器件

型号	品牌	获取价格	描述	数据表
2WO	HY	获取价格	SILICON BRIDGE RECTIFIERS
2WO005	MICRO-ELECTRONICS	获取价格	Bridge Rectifier Diode, 1 Phase, 2A, 50V V(RRM), Silicon, CASE R-8, 4 PIN
2WO005M	MICRO-ELECTRONICS	获取价格	Bridge Rectifier Diode, 1 Phase, 2A, 50V V(RRM), Silicon, CASE R-9, 4 PIN
2WO01M	MICRO-ELECTRONICS	获取价格	Bridge Rectifier Diode, 1 Phase, 2A, 100V V(RRM), Silicon, CASE R-9, 4 PIN
2WO02M	MICRO-ELECTRONICS	获取价格	Bridge Rectifier Diode, 1 Phase, 2A, 200V V(RRM), Silicon, CASE R-9, 4 PIN
2WO04	MICRO-ELECTRONICS	获取价格	Bridge Rectifier Diode, 1 Phase, 2A, 400V V(RRM), Silicon, CASE R-8, 4 PIN
2WO04M	MICRO-ELECTRONICS	获取价格	Bridge Rectifier Diode, 1 Phase, 2A, 400V V(RRM), Silicon, CASE R-9, 4 PIN
2WO06	MICRO-ELECTRONICS	获取价格	Bridge Rectifier Diode, 1 Phase, 2A, 600V V(RRM), Silicon, CASE R-8, 4 PIN
2WO06M	MICRO-ELECTRONICS	获取价格	Bridge Rectifier Diode, 1 Phase, 2A, 600V V(RRM), Silicon, CASE R-9, 4 PIN
2WO08	MICRO-ELECTRONICS	获取价格	Bridge Rectifier Diode, 1 Phase, 2A, 800V V(RRM), Silicon, CASE R-8, 4 PIN

与2W-MOD2相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

7
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

4
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

30
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

13

产品中心

服务支持

精选活动

关于我们

帮助中心

2W-MOD2

2W-MOD2 数据手册

与2W-MOD2相关器件

与2W-MOD2相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

2W-MOD2

2W-MOD2 数据手册

与2W-MOD2相关器件

与2W-MOD2相关文章

您还可以找

您在本页遇到什么问题？