2EZ3.6D5 thru 2EZ200D5, e3
Silicon 2 Watt Zener Diode
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
The 2EZ3.6D5 thru 2EZ200D5 series of axial-leaded 2.0 watt Zeners
provides voltage regulation selections with 5% tolerances from 3.6 to 200
volts in a DO-41 plastic package size. Other Zener voltage tolerances are
also available by changing the suffix number to the tolerance desired such
as 1 and 2 for tighter tolerances or 10 for wider tolerance. These plastic
encapsulated Zeners are also available in various military equivalent
screening levels by adding a prefix identifier as also described in the
Features section. They may be operated at high maximum dc currents or
full power rating with adequate heat. Microsemi also offers numerous other
Zener products to meet higher and lower power applications.
DO-41 or
DO-204AL
(Plastic)
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
•
Zener voltage available 3.6 V to 200 V
•
Regulates voltage over a broad operating current
and temperature range
Standard voltage tolerances are plus/minus 5% with a 5
suffix and 10 % with 10 suffix identification
•
•
•
Wide selection from 3.6 to 200 V
•
•
Tight tolerances available in plus or minus 2% or 1%
with 2 or 1 suffix respectively
Flexible axial-lead mounting terminals
Nonsensitive to ESD per MIL-STD-750 Method
1020
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, and JANTXV are available by
adding MQ, MX, or MV prefixes respectively to part
numbers.
•
•
Withstands surge stresses
High specified maximum current (IZM) when
adequately heat sunk
•
•
•
Surface mount equivalents available as
SMBJ2EZ3.6D5 to SMBJ2EZ200D5 in the DO-214AA
package, or SMBG2EZ3.6D5 to SMBG200D5 in the
DO-215AA package
RoHS compliant devices available by adding “e3” suffix
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
Power dissipation at 25ºC: 3.0 watts (also see
derating in Figure 1).
•
•
CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
•
•
Operating and Storage temperature: -65ºC to +150ºC
TERMINALS: Leads, tin-lead or RoHS compliant
annealed matte-Tin plating solderable per MIL-
STD-750, method 2026
Thermal Resistance: 45 ºC/W junction to lead at 3/8
(10 mm) lead length from body, or 105ºC/W junction
to ambient when mounted on FR4 PC board (1oz Cu)
with 4 mm2 copper pads and track width 1 mm, length
25 mm
•
POLARITY: Cathode indicated by band where
diode is to be operated with the banded end
positive with respect to the opposite end for Zener
regulation.
•
Steady-State Power: 2 watts at TL < 60oC 3/8 inch
(10 mm) from body, or 1.19 watts at TA = 25ºC when
mounted on FR4 PC described for thermal resistance
(also see Figure 1)
•
•
MARKING: Part number
TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
•
•
Forward voltage @200 mA: 1.2 volts (maximum)
Solder Temperatures: 260 ºC for 10 s (max)
•
•
WEIGHT: 0.4 grams
See package dimensions on last page
Copyright © 2008
11-06-2008 REV C
Microsemi
Page 1
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503