TIP-3526PCS-8
Vishay Dale
Infrared Touch Panels
FEATURES
• Fast response time < 50 mS
• 69 x 51 switch matrix, over 3500 switches
• Fits Sharp LJ64ZU50/52 directly
• Hardcoated neutral density (gray) CP filter
• Sealed for environmental resistance
• Immune to high or changing ambient light
• RS-232C interface
• Pre-assembled. No assembly or disassembly required
to mount display
is included to provide a splash proof seal. Optional PC based
software provides simple touch panel integration (see
ordering instructions).
TWDriver emulates a mouse in Windows® applications.
TBDriver emulates a mouse in DOS applications.
Windows® is a registered trademark of the Microsoft
Corporation.
GENERAL DESCRIPTION
Vishay Dale® TIP products are infrared touch panels designed
to fit most flat panel display technologies. The touch panels
consist of infrared emitters and detectors, scanning
electronics, a microprocessor based controller, a bezel and
optical filter assembly and hardware to mount the touch panel
assembly to the flat panel display.
These touch panels are ideal for many applications including
medical instrumentation, machine or process controllers, point
of sale devices, public information displays, banking terminals
and military.
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: 0°C to + 55°C
Storage Temperature: - 55°C to + 85°C
Relative Humidity: 10% - 90% non-condensing
Ambient Light: 2000 foot candles
Each panel has infrared LED emitters and phototransistors
along the X and Y axis, forming a grid of infrared light beams
across the face of the display. The first two numbers of the TIP
"matrix" number specify the number of X axis (vertical) beams,
and the last two numbers specify the number of Y (horizontal)
beams. The controller scans the emitter/detector pairs one at
a time and determines whether both X and Y beams are
blocked, indicating that a finger or stylus is present. (When
beams are blocked on only one axis, they are ignored and not
reported.) The controller determines the coordinates of the
touch point and reports it to the host computer. By
interpolating, a "virtual" beam between two physical beams,
the number of touch points on each axis is effectively doubled.
When an odd number of beams along either axis are blocked,
the coordinate of the center physical beam is reported. When
an even number of beams are blocked, the coordinate of the
virtual beam in the center of the blocked beams is calculated
and reported.
Vishay Dale's® TIP touch panels have a unique patented scan-
ning and logic system that make them virtually immune to most
lighting environments. The touch controller supports ENTER,
EXIT, CONTINUOUS and TRACKING report modes or combi-
nations of these modes. The controller also has a beeper out-
put. Hardware handshaking, software handshaking, baud rates,
auto-baud and X, Y coordinate invert features are jumper
selected. The user initializes the desired report modes and
requests reports when needed.
ELECTRICAL SPECIFICATIONS
Voltage: + 12 VDC 5%
Power Required: 400 mA typical
Beeper Output: Will drive one Schottky TTL load and 90 pf
MATING CONNECTORS
DALE®
OTHER
PIN
J1
280105-02
280108-06
AMP 746288-1
MOLEX 22-01-3037 housing
08-50-0114 terminals
J4
280108-07
MOLEX 22-01-3027 housing
08-50-0114 terminals
J5, J6
INTERFACE SPECIFICATIONS
Type: RS-232C.
Several optical filters are standard to provide the most cost
effective filter for each application. "Non-standard" filters may
be specified as well. The filter increases the contrast ratio of
the display and protects the display face and electronics. Dale®
can assist in recommending the optimum filter based on years
of experience as a display manufacturer. The perimeter of the
filter is bonded to the bezel, and a bezel to front panel gasket
Data Rate: 300, 1200, 9600 baud and auto baud.
Word Format: 8 bits, no parity, 1 start bit, 1 stop bit.
Touch Points: 69 x 51.
www.vishay.com
2
Document Number: 37026
Revision 05-Dec-00
5秒后页面跳转
全球首块英伟达H200交付 黄仁勋“送货上门”
常用8脚开关电源芯片型号大全
74HC04芯片引脚图及功能、应用电路图讲解
CR6842芯片参数、引脚配置、应用电路图详解
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
