5秒后页面跳转
25TMOW_1.5 PDF预览

25TMOW_1.5

更新时间: 2022-06-24 15:43:29
品牌 Logo 应用领域
GAPTEC /
页数 文件大小 规格书
6页 2906K
描述
25W - Single Output - Wide Input - Isolated & Regulated

25TMOW_1.5 数据手册

 浏览型号25TMOW_1.5的Datasheet PDF文件第2页浏览型号25TMOW_1.5的Datasheet PDF文件第3页浏览型号25TMOW_1.5的Datasheet PDF文件第4页浏览型号25TMOW_1.5的Datasheet PDF文件第5页浏览型号25TMOW_1.5的Datasheet PDF文件第6页 
25TMOW_1.5 series  
25W - Single Output - Wide Input - Isolated & Regulated  
DC-DC Converter  
DC-DC Converter  
25 Watt  
Wide 2:1 input voltage range  
High efficiency up to 88%  
Short circuit protection (SCP)  
Isolation voltage: 1.5kVDC  
Over-current, over-voltage,  
over-temperature protection  
Input under-voltage lockout  
RoHS compliant  
Operating temperature range:  
The 25TMOW_1.5 series are isolated 25W DC/DC converters with 2:1  
input voltage. They feature efficiency up to 88%, 1500VDC isolation,  
operating temperature of -40°C to +85°C, input under-voltage protec-  
tion, output over-voltage, output over-current, output short circuit  
protection and meets IEC60950-1.  
-40°C to +85°C  
Fixed switching frequency  
Remote on/off negative logic  
International standard pin-out  
Monotonic startup into  
pre-biased loads  
Adjustable output voltage  
range  
IEC/UL/EN60950-1 approved  
They are widely applied in optical networking equipment, wireless base  
stations, microwave radio communications, telecom and data equip-  
ment applications.  
UL-60950-1 (E347551)  
Common specifications  
Short circuit protection:  
Cooling:  
Output specifications  
Hiccup, continuous, self-recovery  
Free air convection  
-40°C~+85°C  
Item  
Test condition  
Min  
Typ  
5
Max  
5.05  
Units  
V
Voltage set point  
25°C, Io=Io (max)  
4.95  
Operation temperature range:  
Storage temperature range:  
Storage humidity range:  
Thermal stability time:  
FIT:  
Line regulation*  
Vin(min to Vin(max)  
Io= Io(max),  
Vo=Vo(nom)  
0.1  
%Vo  
%Vo  
-55°C~+125°C  
90% MAX  
Load regulation*  
Voltage precision  
Vin=Vin(nom)  
0.125  
30mins  
Io=0 to Io (max)  
312.5; 109/MTBF  
At 50% load  
1
%Vo  
%Vo  
Vibration:  
IEC60068-2-6: 10~500Hz sweep, 0.75mm  
excursion, 10g acceleration, 10minutes  
in each 3 perpendicular directions  
Voltage adjust-  
ment range  
-20  
10  
Remote sense  
Vsense = Vout - Vload,  
sense connected at load  
10  
%Vo  
A
Shock:  
Safety:  
IEC 60068-2-27:200g acceleration, dura-  
tion 3ms, 6 drops in each 3 perpendicu-  
lar directions  
Current Limit  
5.5  
0
7.5  
Compliant to IEC60950-1, UL60950-1,  
EN60950-1 and GB4943  
External load  
capacitance  
Full resistive load,  
low ESR  
2200 µF  
Switching frequency:  
Transportation:  
450KHz TYP, fixed frequency  
ETS300019-1-2  
Temperature  
coefficient  
At all outputs  
200  
200  
ppm/°C  
Dynamic response 25%-50%-25%,50%-  
recovery time 75%-50% Io(nom)  
100  
75  
µS  
MTBF  
3,200,000 hours  
(Telcordia SR332, ground fixed, 40°C):  
Dynamic response 50%-75%-50%,di/  
dt=2.5A/µS  
Weight:  
6.5g  
• Recovery time  
• Overshoot  
µs  
mV  
150  
Protection specifications  
Ripple and noise**  
50  
10  
mVp-p  
ms  
Item  
Test condition  
Min  
Typ  
Max  
Units  
Turn-on delay time Time from instant at  
which Vin=Vin (Turn-  
50  
50  
Input under voltage  
lockout  
• Turn-on  
• Turn-off  
• Hysteresis  
33  
31  
34  
33  
1
36  
35  
V
V
V
on) until Vo=10% of  
Vo (nom)  
Short circuit current  
Hiccup  
0.3  
yes  
A
Turn-on rise time  
Time for Vo to rise  
from 10% of Vo (nom)  
to 90% of Vo (nom)  
10  
ms  
Over current  
protection  
Hiccup mode,  
automatic recovery  
Over voltage  
protection  
Under the converter’s  
maximum allowable  
output power. Hiccup  
mode, minimum  
6
7.2  
V
*
Regulation specifications describe the deviation as the input line voltage or output  
load current is varied from a nominal midpoint value to either extreme (50% load).  
** Output noise may be further reduced by installing an external filter. See  
Ripple&Noise test setup. Use only as much output filtering as needed and no  
more. Larger caps (especially low-ESR ceramic types) may slow transient response  
or degrade dynamic performance. Thoroughly test your application with all  
components installed.  
load of 20%Io max  
Over temperature  
protection  
Automatic recovery  
See OTP section  
115  
5
°C  
°C  
Over Temperature  
Protection Hysteresis See OTP section  
Automatic recovery  
Remote control specifications  
Item  
Test condition  
Min  
-0.7  
2.4  
Typ  
1
Max  
1.2  
Units  
V
Logic low voltage  
Logic high voltage  
Control current  
Example:  
25TMOW_4805S1.5  
25 = 25Watt; T = SMT; M = Miniature; O = Open frame; W = wide  
input (2:1); 36-75Vin; 5Vout; S = single output; 1.5 = 1500VDC  
14  
V
mA  
Page 1 of 6  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
25TMOW_1.5 – Rev. 2020-1.0  
Specifications subject to change without notice.  

与25TMOW_1.5相关器件

型号 品牌 描述 获取价格 数据表
25TMOW_4805S1.5 GAPTEC 25W - Single Output - Wide Input - Isolated & Regulated

获取价格

25TQC100MD3 PANASONIC TQC

获取价格

25TQC10MEB PANASONIC TQC

获取价格

25TQC15MV PANASONIC TQC

获取价格

25TQC15MYFB PANASONIC TQC

获取价格

25TQC15MYFD PANASONIC TQC

获取价格