TPS2375-1
D−8
PW−8
TPS2377-1
www.ti.com
SLVS570–MARCH 2005
IEEE 802.3af PoE POWERED DEVICE CONTROLLERS WITH AUTO-RETRY
FEATURES
APPLICATIONS
•
•
•
•
•
VoIP Phones
•
•
•
•
•
•
•
•
•
•
•
Auto-Retry After Current-Limit Fault
TPS2375-1: IEEE 802.3af Thresholds
TPS2377-1: Legacy Thresholds
WLAN Access Points
Security Cameras
Internet Appliances
POS Terminals
Fully Supports IEEE 802.3af Specification
Integrated 0.58-Ω, 100-V, Low-Side Switch
15-kV System Level ESD Capable
Programmable Inrush Current Control
Fixed 450-mA Current Limit
PRODUCT SELECTOR
2375-1
2377-1
2375
802.3af
Latch
2376
Adjustable
Latch
2377
Legacy
Latch
UVLO
802.3af
Legacy
Protection Auto-Retry Auto-Retry
Package PW
Open-Drain, Power-Good Reporting
Industrial Temperature Range: -40°C to 85°C
8-Pin SOIC and TSSOP Packages
D
D, PW
D,PW
D,PW
DESCRIPTION
These easy-to-use 8-pin integrated circuits contain all of the features needed to develop an IEEE
802.3af-compliant powered device (PD). The TPS2375-1 and TPS2377-1 are second generation PDCs (PD
Controllers) featuring a 100-V ratings and true open-drain, power-good function. These devices are auto-retry
versions of selected TPS2375 family members. Information on the TPS2375/6/7 devices can be found on the
TPS2375/6/7 data sheet (SLVS525A).
In addition to the basic functions of detection, classification, and undervoltage lockout (UVLO), these controllers
include an adjustable inrush limiting feature. The TPS2375-1 has 802.3af-compliant UVLO limits, and the
TPS2377-1 has legacy UVLO limits.
The TPS2375 family specifications incorporate a voltage offset of 1.5 V between its limits and the IEEE 802.3af
specifications to accommodate the required input diode bridges used to make the PD polarity insensitive.
Additional resources can be found on the TI Web site www.ti.com.
Power Up
RJ-45
and
1
Detect
Classify
Inrush
TX
Pair
Data to
Ethernet PHY
2
Class 3
Input
Current
Current
DF01S
2 Places
V
(PG-RTN)
DET
PG
ILIM
V
4
DD
5
Spare
V
Pair
CLASS
RTN
RTN
7
8
Spare
Pair
Note: All Voltages With Respect to VSS.
3
RX
Notes:
1) Class 3 PD depicted
2) PG pullup resistor is optional.
Data to
Pair
Ethernet PHY
6
Figure 1. Typical Application Circuit and Start-Up Waveforms
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005, Texas Instruments Incorporated