Application Specification
Waterproof Signal Double Lock
Connector System
114-143067
01 NOV 19 Rev A
NOTE
All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
Unless otherwise specified, dimensions have a tolerance of ±0.13 [±.005] and angles have a tolerance of ±2°. Figures and
illustrations are for identification only and are not drawn to scale.
1. INTRODUCTION
This specification covers the requirements for application of the waterproof signal double lock connector
system and twist and lock connector system with a 2.5 mm centerline. The waterproof signal double lock
connector system is available in a 2 through 6 position, single row free hanging panel mount configuration for a
22 to 26 AWG wire range.
The twist and lock connector system is available in a 4 or 6 position, dual row and 12 position, triple row free
hanging panel mount configuration for a 22 to 26 AWG wire range.
The optional seals on the waterproof signal double lock and the twist and lock connector system are rated to
IP67. If seals are required, the mating interface seal must be used in conjunction with the gang seal. Terminal
position assurance (TPA) accessories are available for all wire sizes and may be used on connectors with or
without optional seals.
Basic terms and features of this product are provided in Figure 1.
Cap Housing (1x4 Shown)
Twist and Lock Cap Housing
(2x4 Shown)
Plug Housing (1x4 Shown)
Mating Latch
Panel Stop
(4 Places)
Panel Latch
(2 Places)
Mating Face
Mating Face
TPA Locking Tab
(2 Places)
Optional Plug Terminal Position
Assurance (TPA) (1x4 Shown)
Optional Cap Terminal Position
Assurance (TPA) (1x4 Shown)
Tab Terminal
Locking Latch
(2 Places)
Mater Interface
Perimeter Seal
Gang Seal (Wire Seal) (1x4 Shown)
Receptacle Terminal
Wire Cavity
Figure 1
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
© 2019 TE Connectivity Ltd. family of companies.
All Rights Reserved.
*Trademark
PRODUCT INFORMATION 1-800-522-6752
1 of 9
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.