Datasheet > 2215526-1

2215526-1

更新时间： 2024-11-07 01:04:31

品牌	Logo	应用领域
泰科 - TE		/
页数	文件大小	规格书
4页	333K
描述
Small Form-Factor Pluggable Cage Assembly Seating Tool

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

2215526-1 数据手册

Instruction Sheet

Small Form-Factor Pluggable (QSFP

Behind Bezel, Heat Sink Round Light

Pipe) Cage Assembly Seating Tool

408-32212

05 NOV 15 Rev A

1 X 4 Seating Tool

(Bottomed on

Cage Assembly)

Back of

Seating Tool

1 X 4 Cage Assembly

2170567-2

1 X 4 Wall Support

(For Clarity, Not

Shown Installed)

Compliant Pin

Contact

Printed Circuit (PC)

Board (Ref)

PC Board Support

Fixture (Ref)

SFT+ CAGE

ASSEMBLY

CONFIGURATION

SEATING

TOOL KIT

APPLICATION

SPECIFICATION

2215046-1

1 X 4

114-13120

Figure 1

1. INTRODUCTION

QSFP cage assembly seating tool listed in Figure 1 is used to seat the cage assembly described in Figure 1

onto the pc board. The cage assembly contains compliant pin contacts to allow solderless pc board installation.

Read these instructions thoroughly before using the seating tool kit.

NOTE

Dimensions on this sheet are in metric units [with U.S. customary units in brackets]. Figures and illustrations are for reference

only and are not drawn to scale.

2. DESCRIPTION (Figure 1)

Each seating tool consists of a seating tool and a wall support. The seating tool has cutouts (two located on

each side) to accept the protruding part of the standoffs of the cage assembly. The wall support must be

installed into the ports of the cage assembly.

The top of the seating tool provides a surface to accept the force applied by the application tool to seat the

product onto the pc board. During seating, the back and sides of the seating tool protect the cage assembly

from damage. The wall support supports the individual ports of the cage assembly.

3. REQUIREMENTS

3.1. PC Board Support Fixture (Customer Supplied)

A pc board support must be used to provide proper support for the pc board and to protect the pc board and

the connector and cage assembly from damage. The support fixture must be designed for specific needs using

the following recommendations:

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com.

*Trademark

PRODUCT INFORMATION 1-800-522-6752

1 of 4

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.

12 3 4

中文翻译

下载PDF

与2215526-1相关器件

型号	品牌	获取价格	描述	数据表
2215527-1	TE	获取价格	Small Form-Factor Pluggable Cage Assembly Seating Tool
2215528-1	TE	获取价格	Small Form-Factor Pluggable Cage Assembly Seating Tool
2215529-1	TE	获取价格	Small Form-Factor Pluggable Cage Assembly Seating Tool
2215530-1	TE	获取价格	Small Form-Factor Pluggable Cage Assembly Seating Tool
2-215570-0	MACOM	获取价格	Ribbon Cable Connector Selection Guide
2-215570-4	MACOM	获取价格	Ribbon Cable Connector Selection Guide
22-15-6033	MOLEX	获取价格	Board Connector, 3 Contact(s), 1 Row(s), Female, Right Angle, 0.1 inch Pitch, Solder Termi
22-15-6043	MOLEX	获取价格	Board Connector, 4 Contact(s), 1 Row(s), Female, Right Angle, 0.1 inch Pitch, Solder Termi
22-15-6053	MOLEX	获取价格	Board Connector, 5 Contact(s), 1 Row(s), Female, Right Angle, 0.1 inch Pitch, Solder Termi
22-15-6083	MOLEX	获取价格	Board Connector, 8 Contact(s), 1 Row(s), Female, Right Angle, 0.1 inch Pitch, Solder Termi

与2215526-1相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

14
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

12
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

36
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

33

产品中心

服务支持

精选活动

关于我们

帮助中心

2215526-1

2215526-1 数据手册

与2215526-1相关器件

与2215526-1相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

2215526-1

2215526-1 数据手册

与2215526-1相关器件

与2215526-1相关文章

您还可以找

您在本页遇到什么问题？