Datasheet > 213843-1

213843-1

更新时间： 2024-11-02 01:10:27

品牌	Logo	应用领域
泰科 - TE		连接器连接器支架
页数	文件大小	规格书
2页	213K
描述
Extraction Tools

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

213843-1 技术参数

是否Rohs认证：	符合	生命周期：	Active
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8536.90.40.00	Factory Lead Time：	3 weeks
风险等级：	5.6	组装件名称：	CONTACT
连接器支架类型：	CONNECTOR ACCESSORY	触点性别：	FEMALE
DIN 符合性：	NO	设计用途：	POWER
IEC 符合性：	NO	MIL 符合性：	NO
材料：	COPPER	安装方式：	STRAIGHT
端子类型：	CRIMP	Base Number Matches：	1

213843-1 数据手册

Instruction Sheet

Extraction Tools

318813-1 and 318813-3

408-4374

16 FEB 15 Rev B

Interlock Lever

Plastic Handle

Spring-Loaded

Metal Tip

Figure 1

1. INTRODUCTION

Extraction Tool 318813-1, shown in Figure 1, is designed to remove the Size 8 straight and right-angle coaxial

contacts and AMPLIMITE* power contacts and .125 POWERBAND* contacts listed in Figure 2 from connector

housings. Read these instructions thoroughly before attempting to remove any contacts. Tool 318813-3 is

designed for the Extended POWERBAND Pin contacts.

CONTACT BASE PART NUMBER

COAXIAL

POWER

211159-1

212013-1

212014-1

213841-1

213843-1

213845-1

213847-1

211159-2

211161-1

211161-2

212007-1

212008-1

228596-1

228604-1

228618-1

Figure 2

2. DESCRIPTION (Figure 1)

The extraction tool consists of a spring-loaded metal tip with an integral plunger mounted to a plastic handle

with an interlock lever. When the interlock lever is depressed, the plunger is held until the contact locking

lances are depressed by the tip.

After the lever is released, the plunger is released, permitting the contact to be pushed out the rear of the

housing.

3. EXTRACTION PROCEDURE (Figure 3)

NOTE

Before extracting coaxial contacts, use a small, sharp tool to remove the nylon alignment ring from the front of the contact.

1. Determine the contact to be removed and grasp the wire attached to that contact.

2. Move the contact forward as far as possible by pushing the wire toward the housing.

3. Depress the extraction tool interlock lever and insert the tip of the tool into the contact cavity in the

mating face of the housing. Make sure that the tip is completely bottomed in the cavity.

4. While holding the tool in position, release the interlock lever, then push the handle until the contact

backs out of the rear of the housing. The wire and contact should pull out of the housing.

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com.

*Trademark

TOOLING ASSISTANCE CENTER 1-800-722-1111

PRODUCT INFORMATION 1-800-522-6752

1 of 2

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.

中文翻译

下载PDF

与213843-1相关器件

型号	品牌	获取价格	描述	数据表
213845-1	TE	获取价格	Extraction Tools
213847-1	TE	获取价格	Extraction Tools
213848-1	MACOM	获取价格	AMP Circular Connectors for Commercial Signal and Power Applications
213849-1	MACOM	获取价格	AMP Circular Connectors for Commercial Signal and Power Applications
213850-1	MACOM	获取价格	AMP Circular Connectors for Commercial Signal and Power Applications
213851-1	MACOM	获取价格	AMP Circular Connectors for Commercial Signal and Power Applications
213852-1	MACOM	获取价格	AMP Circular Connectors for Commercial Signal and Power Applications
213853-1	MACOM	获取价格	AMP Circular Connectors for Commercial Signal and Power Applications
213860-1	MACOM	获取价格	AMP Circular Connectors for Commercial Signal and Power Applications
2138601635	MOLEX	获取价格	NTC Ring Temperature Sensor-to-Micro-Lock Plu

与213843-1相关文章

三星深化印度制造布局，供应链本地化进程加速
2024-10-29

22
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

23
纳微科技震撼发布GaNSlim革新氮化镓功率芯片
2024-10-18

46
意法半导体发布第四代SiC技术，助力电动汽车电驱
2024-10-15

54

产品中心

服务支持

精选活动

关于我们

帮助中心

213843-1

213843-1 技术参数

213843-1 数据手册

与213843-1相关器件

与213843-1相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

213843-1

213843-1 技术参数

213843-1 数据手册

与213843-1相关器件

与213843-1相关文章

您还可以找

您在本页遇到什么问题？