®
Series209/210AUTO-DIP
®
®
AUTO-DIP Switch
Automatically
Insertable, Wave
Solderable, Board
Washable DIP Switch
Features
Optimized Mechanical Features
• Fully sealed to withstand insertion shock,
wave solder temperatures, and board washing
• Positive detent seperated from contactor
• Compatible with Amistar, DynaPert,
Universal, NETCO assembly and other machines
Optimized Contact System
• Redundant, wiping contact
• Contactor does not deflect during actuation
• Available low profile, medium and extended height
actuator
Materials
• Series 209 - gold plated beryllium copper contacts
• Series 210 - gold flash plated beryllium copper contacts
• High temperature material (UL94V-0)
• RoHS compliant
Series 209 – Premium AUTO-DIP Switches
Series 210 – Economical AUTO-DIP Switches
Electrical and Mechanical Specifications
Switch Function
Allowable Solder Time
SPST- 2 through 10 and 12 positions
Up to 5 seconds at 260°C
Vibration
Switch Contact Resistance
Per MIL-STD-202F, method 204D, condition B
(.06" or 15 G’s between 10 HZ to 2K HZ) with no
contact inconsistencies greater than 1 microsecond.
Switch Series
Initial, max.
25 milliohms
100 milliohms
End of life, max.
50 millohms
209
210
500 millohms
Shock
Insulation Resistance
Per MIL-STD-202F, method 213B, condition A
(50 G’s) with no contact inconsistencies greater
than 1 microsecond.
1,000 megohms minimum between
insulated terminals
Dielectric Strength
Sealing
500 VDC for 1 minute between adjacent
switches
Standard bottom seal
Optional top tape seal
Nonswitching Rating
100 mA or 50 VDC maximum
Operating Temperature
Switch Capacitance
–40°C to +85°C
5 pF maximum between adjacent closed switches
Packaging
Actuation Life
Standard : Anti-Static tube packaging
Series 209: 2,000 cycles switching @ 100 mA,
20 VDC or @ .1 mA, 5 VDC (dry circuit)
Series 210: 1,000 cycles switching @ 100 mA,
20 VDC or @ .1 mA, 5 VDC (dry circuit)
© 2008 CTS Corporation. All rights reserved. Information subject to change.
2/19/08
1 - 2
CTS Electronic Components
www.ctscorp.com