MODEL: 20VS8-202Y
Hybrid IC Isolation Amplifiers 20 Series
GENERAL SPECIFICATIONS
Construction: Hybrid IC
Housing material: Flame-resistant resin (black)
Isolation: Input or reference voltage source to output or
power supply
ISOLATION AMPLIFIER
(small size, input isolation, SIP type)
Functions & Features
• Being used for printed wiring board installation
• High-linearity
INPUT SPECIFICATIONS
■ DC Voltage
• High speed response of 150 μsec.
• Isolating between input and output or power
• Isolation between input and output or power supply up to
3000 V AC
Input : -5 – +5 V DC
Input resistance: ≥ 1 MΩ (10 kΩ in power failure)
Overload input voltage: ±15 V DC continuous
Input offset voltage: ±2 mV @ G = 1
Input bias current: 25 pA TYP. (@25°C)
• Power 15 V DC
Typical Applications
• Isolating the field and I/O circuit of microprocessor to
reduce noise from field
OUTPUT SPECIFICATIONS
■ DC Voltage: -5 – +5 V DC
Load resistance: ≥ 1 MΩ
• Available for manufacturers of small-lot products to omit
the development of isolation circuit
Output impedance: ≤ 5 kΩ
6.6 (.26)
REFERENCE VOLTAGE SOURCE
■ FOR INPUT
15.9 (.63)
Output voltage: ±8.5 V DC ±1 V (@ 15 V DC power supply )
Load current: ≤ 1 mA
52.8 (2.08)
mm (inch)
INSTALLATION
Power input
•DC: Rating ±5 %; approx. 7.5 mA with no load
Operating temperature: -25 to +85°C (-13 to +185°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Soldering to the printed wiring board
Weight: 13 g (0.46 oz)
MODEL: 20VS8–202Y[1]–U
ORDERING INFORMATION
• Code number: 20VS8-202Y[1]-U
Specify a code from below for [1].
(e.g. 20VS8-202YL-U)
PERFORMANCE in percentage of span
Unless otherwise specified, G = 1.
Linearity:
±0.05 % (20VS8-202YJ)
TYPE
±0.025 % (20VS8-202YK)
202Y: Input isolation
INPUT RANGE -5 – +5 V DC
OUTPUT RANGE -5 – +5 V DC
±0.012 % (20VS8-202YL)
Temp. coefficient:
±25 ppm/°C (0℃ - 70℃; 32 - 158°F)
±50 ppm/°C (-25℃ - +85℃; -13 - +185°F)
Frequency characteristics: Approx. 2 kHz, -3 dB
Response time: ≤ 150 μsec. (0 – 90 %)
Conversion gain: ×1 ±1.5 %
[1] LINEARITY
J: ±0.05 %
K: ±0.025 %
Gain adjustable range: × 1 to × 100
Line voltage effect: ±0.02 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 3000 V AC @ 1 minute
(input or reference voltage source to output or power
supply)
L: ±0.012 %
POWER INPUT
DC Power
U: 15 V DC
20VS8-202Y SPECIFICATIONS
ES-4443 Rev.2 Page 1/4
http://www.m-system.co.jp/