TransientVoltage Suppression Diodes
Axial Leaded – 20000W > 20KPA series
RoHS
20KPA Series
Description
Uni-directional
The 20KPA Series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
Bi-directional
• VBR @TJ= VBR@25°C × (1+αT
x (TJ - 25))
lines in accordance with
IEC 61000-4-2 (IEC801-2)
• EFT protection of data
lines in accordance with
IEC 61000-4-4 (IEC801-4)
• Low incremental surge
resistance
(αT:Temperature Coefficient)
• Glass passivated chip
junction in P600 package
• 20000W peak pulse
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
Agency Approvals
• Typical IR less than 2μA
above 49V
AGENCY
AGENCY FILE NUMBER
E230531
• High temperature
soldering guaranteed:
260°C/40 seconds /
0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg)
tension
• Plastic package has
underwriters laboratory
flammability classification
94V-O
• Fast response time:
typically less than 1.0ps
from 0 Volts to BV min
• Excellent clamping
capability
•Typical failure mode is
short from over-specified
voltage or current
• Whisker test is conducted
based on JEDEC
JESD201A per its table 4a
and 4c
• IEC-61000-4-2 ESD
Maximum Ratings andThermal Characteristics
(TA=25°C unless otherwise noted)
Parameter
Symbol
PPPM
Value
Unit
W
Peak Pulse Power Dissipation by
10/1000μsTest Waveform (Fig.2)
(Note 1)
20000
Steady State Power Dissipation on
Inifinite Heat Sink atTL=75ºC (Fig. 6)
• Matte tin lead–free plated
• Halogen free and RoHS
compliant
PD
8.0
W
A
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
Only (Note 2)
IFSM
400
15kV(Air), 8kV (Contact)
Operating Junction and Storage
Temperature Range
• ESD protection of data
TJ, TSTG -55 to 150
°C
Applications
TypicalThermal Resistance Junction
to Lead
RuJL
RuJA
8.0
40
°C/W
°C/W
TVS devices are ideal for the protection of I/O interfaces,
CC bus and other vulnerable circuits used in telecom,
TypicalThermal Resistance Junction
to Ambient
V
computer, industrial and consumer electronic applications.
Notes:
1. Non-repetitive current pulse , per Fig. 4 and derated aboveTA = 25°C per Fig. 3.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
Functional Diagram
Additional Information
Datasheet
Resources
Samples
Bi-directional
Cathode
Anode
Uni-directional
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/24/14