Catalog: 1654001
Issue Date: 06.2011
Corcom Product Guide
General Purpose RFI Power Line Filters – Ideal for High Impedance Load
K Series
VK6
VK7 / EK7
UL Recognized
CSA Certified
VDE Approved**
1
VK1 / EK1
VK3 / EK3
K Series
Specifications
• Suitable for high impedance loads
Maximum leakage current each Line to Ground:
VK Models
.5 mA
EK Models
• Well suited to applications where pulsed,
continuous and/or intermittent RFI interference
is present
@ 120 VAC 60 Hz:
@250 VAC 50 Hz:
.21 mA
.36 mA
1.0 mA
Hipot rating (one minute):
Line to Ground:
Line to Line:
• EK models meet the very low leakage current
requirements for VDE portable equipment and
non-patient care medical equipment
2250 VDC
1450 VDC
Rated Voltage (max):
Operating Frequency:
Rated Current:
250 VAC
50/60 Hz
1 to 60A*
• Available with ground line inductor (choke)
Ordering Information
10 E K 7 M
Operating Ambient Temperature Range
(at rated current I ): -10°C to +40°C
r
In an ambient temperature (T ) higher than +40°C
a
the maximum operating current (I ) is calculated as
o
Suffix
follows: I = I (85-Ta)/45
o
r
M – Metric inserts (style 7 only)
Omit for standard or none
C – Ground choke (30, 40VK6 only)
Available Part Numbers
1VK1
1VK3
10VK6
10VK7
10VK7M
20VK1
20VK6
20VK7*
30VK6
30VK6C
40VK6
40VK6C
60VK6
1EK1
2EK3
3EK1
3EK3
3EK7
3EK7M
5EK1
Input / Output Style
1 – .250 [6.3] spade terminals
3 – Wire leads
6 – Threaded bolt
7 – IEC inlet* (line side)
.250 [6.3] spade terminals
(load side)
2VK1
2VK3
3VK1
3VK3
3VK7
3VK7M
5VK1
5VK3
5VK7
5VK7M
10VK1
10VK3
5EK3
5EK7
K Series
5EK7M
10EK1
10EK3
10EK7
10EK7M
20EK1
Leakage current designation
E – Low leakage (<0.5 mA)
V – Standard
1EK3
2EK1
Current Rating
1, 2, 3, 5, 10, 20, 30, 40 or 60A
**20VK7, 20A model tested by Underwriters Laboratories
to US and Canadian requirements and is
VDE approved at 16A, 250VAC
*1-15A: IEC 60320-1 C14 inlet mates with C13 connector
20VK7: C20 inlet mates with C19 connector
49
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com