1PMT5913Be3 thru 1PMT5956Be3
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
This surface mountable 3.0 W Zener diode series in the JEDEC DO-216
package is similar in electrical features to the JEDEC registered 1N5913B
thru 1N5956B axial-leaded package for 3.3 to 200 V. It is an ideal selection
for applications requiring low profile and high-density mounting that are also
RoHS Compliant. When properly heat sunk, these zener diodes provide
power-handling capabilities only found in larger packages. In addition to its
size advantages, Powermite® package features include a full metallic
bottom that eliminates the possibility of solder flux entrapment during
assembly, and a unique locking tab acts as an integral heat sink. Its
innovative design makes this device ideal for use with automatic insertion
equipment.
DO-216
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
•
•
•
•
•
•
•
Very low profile surface mount package (1.1 mm)
Integral Heat Sink Locking Tabs
Compatible with automatic insertion equipment
Full metallic bottom eliminates flux entrapment
RoHS Compliant
Zener voltage 3.3 to 200 Volts
Low reverse leakage
Tight tolerance available
•
Regulates voltage over a broad operating current
and temperature range
•
•
•
•
Wide selection from 3.3 to 200 V
Flexible axial-lead mounting terminals
Nonsensitive to ESD
Moisture classification is Level 1 per IPC/JEDEC
J-STD-020B with no dry pack required
ESD Rating of >16kV per human body model
•
•
MAXIMUM RATINGS
Junction and storage temperatures: -55°C to +150°C
DC power dissipation: 3.0 watt with case bottom (TAB
1) ≤ 60°C (also see derating in Figure 1).
MECHANICAL AND PACKAGING
Terminals: Annealed matte-Tin plating over copper
and readily solderable per MIL-STD-750 method 2026
(consult factory for Tin-Lead plating)
Polarity: Cathode designated by TAB 1 (backside)
Case: Molded epoxy package meets UL94V-0
Marking: Last three numerical digits of part number
(see device marking code in Electrical Characteristics
table below with dot “•” suffix for RoHS Compliant)
Weight: 0.016 gram (approximate)
•
•
•
•
•
•
•
Forward voltage @200 mA: 1.2 volts (maximum)
Thermal Resistance: 30 ºC/W junction to Case bottom
(Tab 1), or 230ºC/W junction to ambient when mounted
on FR4 PC board (1 oz Cu) with recommended
footprint (see last page).
•
•
•
•
Steady-State Power: 3.0 watts at TC < 60oC, or 0.54
watts at TA = 25ºC when mounted on FR4 PC board
and recommended footprint as described for thermal
resistance (see Figure 1 and last page)
Tape & Reel option: Standard per EIA-481-B
7 inch reel 3,000 pieces
13 inch reel 12,000 pieces
Solder Temperatures: 260 ºC for 10 s (max)
ELECTRICAL CHARACTERISTICS @ TL = 30oC
Zener
Test
Dynamic
Knee
Knee
Maximum
Reverse
Voltage
Maximum
Zener
Current
IZM
Voltage
Current
Impedance
Current Impedance Reverse
Current
IZK
Device
Marking
(4)
Microsemi
Number
VZ
(1)
VOLTS
IZT
ZZT
(2)
OHMS
ZZK
IR
VR
(3)
mA
mA
mA
OHMS
VOLTS
μAdc
100
75
25
5
5
5
5
5
1PMT5913B
1PMT5914B
1PMT5915B
1PMT5916B
1PMT5917B
1PMT5918B
1PMT5919B
1PMT5920B
913•
914•
915•
916•
917•
918•
919•
920•
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
113.6
104.2
96.1
87.2
79.8
73.5
66.9
60.5
10
9.0
7.5
6.0
5.0
4.0
2.0
2.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
500
500
500
500
500
350
250
200
1.0
1.0
1.0
1.0
1.5
2.0
3.0
4.0
749.1
686.4
633.6
547.2
526.4
481.8
432.3
397.7
Copyright © 2005
6-19-2005 REV H
Microsemi
Page 1
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503