1N4954US thru 1N4996US, 1N5968US thru
1N5969US, and 1N6632US thru 1N6637US
VOIDLESS-HERMETICALLY-SEALED
Surface Mount 5 WATT GLASS ZENER
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
This surface mount Zener Voltage Regulator series is military qualified to
MIL-PRF-19500/356 and is ideal for high-reliability applications where a
failure cannot be tolerated. These industry-recognized 5 Watt Zener
Voltage Regulators are hermetically sealed with voidless-glass construction
using an internal metallurgical bond. It includes Zener selections from 3.3
to 390 volts in standard 5% tolerances as well as tighter tolerances
identified by different suffix letters on the part number. They are also
available in axial-leaded packages for thru hole mounting by deleting the
“US” suffix (see separate data sheet for 1N4954 thru 1N4996, 1N5968 thru
1N5969, and 1N6632 thru 1N6637). Microsemi also offers numerous other
“E” Package
(or “D-5B”)
Zener products to meet higher and lower power ratings in both thru-hole
and surface mount packages.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
•
•
•
Popular JEDEC registered series
Voidless hermetically sealed glass package
Triple-layer passivation
Internal “Category I” Metallurgical bonds for
1N4954US thru 1N4996US, and “Category III” for
1N6632US thru 1N6637US as well as 1N5968US
thru 1N5959US
•
Regulates voltage over a broad operating current and
temperature range
•
•
Extensive selection from 3.3 to 390 V
Standard voltage tolerances are plus/minus 5% with
no suffix
•
Tight tolerances available in plus or minus 2% or 1%
with C or D suffix respectively
•
•
JAN, JANTX, JANTXV, and JANS available per MIL-
•
•
•
Extremely robust construction
Nonsensitive to ESD per MIL-STD-750 Method 1020
PRF-19500/356
Axial-leaded equivalents (see separate data sheet for
1N4954 thru 1N4996, 1N6632 thru 1N6637 and
1N5968 thru 1N5969)
Inherently radiation hard as described in Microsemi
MicroNote 050
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
•
•
Operating Temperature: -65oC to +175oC.
•
CASE: Hermetically sealed voidless hard glass with
Storage Temperature: -65oC to +175oC.
Tungsten slugs
Power Dissipation: 5 Watts @ TEC = 125oC and
derate linearly at 0.1 W/ oC above TEC = 125oC to
zero at 175 oC
•
TERMINATIONS: End caps are solid Silver (Ag) with
Tin/Lead (Sn/Pb) finish
MARKING: None
POLARITY: Cathode indicated by band
Tape & Reel option: Standard per EIA-481-B
Weight: 539 mg
•
•
•
•
•
•
•
Thermal Resistance: 7oC/W junction to end cap for
1N4954US thru 1N4996US and 10oC/W for
1N6632US thru 1N6637US as well as 1N5968US
thru 1N5969US
Thermal Impedance at 10 ms: 1.8oC/W for
1N4954US thru 1N4996US, and 3.0oC/W for both
the 1N6632US thru 1N6637US & 1N5968US thru
1N5969US
Forward Voltage: 1.50 V at 1.0 A
Copyright 2004
Microsemi
Page 1
11-22-2004 REV B
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503