1N4565 thru 1N4584A-1 DO-35
6.4 Volt Temperature Compensated Zener
Reference Diodes
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
The popular 1N4565 thru 1N4584A-1 series of Zero-TC Reference Diodes
provides a selection of both 6.4 V nominal voltages and temperature
coefficients to as low as 0.0005%/oC for minimal voltage change with
temperature. Four different operating currents are available for selection at
0.5 mA, 1.0 mA, 2.00 mA, and 4.00 mA. These glass axial-leaded DO-35
reference diodes are optionally available with an internal-metallurgical-bond
by adding a “-1” suffix. This same “-1” bonded Zener package construction
is also available in JAN, JANTX, and JANTXV military qualifications.
Microsemi also offers numerous other Zener Reference Diode products for a
variety of other voltages up to 200 V.
DO-35
(DO-204AH)
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
•
JEDEC registered 1N4565 thru 1N4584 series
• Provides minimal voltage changes over a broad
temperature range for instrumentation and other
circuit designs requiring a voltage reference
Internal metallurgical bond option available by
adding a “-1” suffix
• Temperature coefficient selections available from
•
•
Zener reference voltage of 6.4 V +/- 5% with tighter
tolerance available at lower voltage
1N4565 thru 1N4584 also have qualification to MIL-
PRF-19500/452 by adding the JAN, JANTX, or
JANTXV prefixes to part numbers a well as the “-1”
suffix; e.g. JANTX1N4574A-1, etc.
0.01%/ºC to 0.0005%/ºC
• Tight reference voltage tolerances available with
nominal value centered at 6.2 V by adding tolerance
1%, 2%, 3%, etc. after the part number for
identification, e.g. 1N4569-2%, 1N4579A-1%,
1N4574A-1-1%, etc.
•
Military surface mount equivalents also available in
DO-213AA by adding UR-1 suffix and the JAN,
JANTX, and JANTXV prefix, e.g.
•
Flexible axial-leaded mounting terminals
• Nonsensitive to ESD per MIL-STD-750 Method 1020
• Typical low capacitance of 100 pF or less
JANTX1N4569AUR-1 (see separate data sheet)
•
•
Also available in DO-7 package including military
qualifications up to JANS (see separate data sheet)
JANS equivalent available in DO-35 via SCD
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
•
•
Operating Temperatures: -65oC to +175oC
•
•
CASE: Hermetically sealed glass case. DO-35
Storage Temperatures: -65oC to +175oC
(DO-204AH) package
DC Power Dissipation: 500 mW @ TL = 25oC with
maximum current IZM 70 mA. NOTE: For optimum
voltage-temperature stability, the operating test
current (IZT) should be as specified in the Electrical
Characteristics Table (power less than 30 mW)
TERMINALS: Leads, tin-lead plated solderable per
MIL-STD-750, Method 2026
MARKING: Part number and cathode band
POLARITY: Reference diode to be operated with
the banded end positive with respect to the
opposite end
•
•
•
Solder Temperatures: 260oC for 10 s (max)
•
TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
•
•
WEIGHT: 0.2 grams.
See package dimensions on last page
Copyright 2003
Microsemi
Page 1
10-27-2003 REV B
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503