Datasheet > 18KJV-U366-R

18KJV-U366-R

更新时间： 2024-11-19 02:50:39

品牌	Logo	应用领域
爱模 - MSYSTEM		DCS 分布式控制系统
页数	文件大小	规格书
3页	95K
描述
Rack-mounted DCS Signal Conditioners 18K-RACK

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

18KJV-U366-R 数据手册

MODEL: 18KJV

Rack-mounted DCS Signal Conditioners 18K-RACK

POWER INPUT

DC Power

R: 24 V DC

SIGNAL TRANSMITTER

(field-programmable)

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

Functions & Features

• Software setting of input range via programming unit

(model: PU-2x) is available

RELATED PRODUCTS

• Programming Unit (model: PU-2x)

• Module can be retracted without removing wiring for an

insulation test

• PC configurator software (model: JXCON)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals on the front and connector on the rear; terminal

cover provided

Connection

MODEL: 18KJV–[1]66–R

Input: M3.5 screw terminals (torque 0.8 N·m)

and connector

Output 1: Connector

ORDERING INFORMATION

• Code number: 18KJV-[1]66-R

Specify a code from below for [1].

(e.g. 18KJV-666-R)

Output 2: M3.5 screw terminals (torque 0.8 N·m)

and connector

Power input: Supplied from connector

Screw terminal: Nickel-plated steel

• Special input range (For codes U1, U2 & U3)

Isolation: Input to output 1 to output 2 to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Adjustments: Programming Unit (model: PU-2x); Input

range, zero and span, simulating output, etc.

(Input range can be changed with Codes U1, U2 or U3 and

limited within ranges of each code type.)

(Refer to the users manual of JXCON for the adjustments

configurable with JXCON.)

[1] INPUT

Current

A: 4 – 20 mA DC (Input resistance 250 Ω)

H: 10 – 50 mA DC (Input resistance 100 Ω)

Voltage

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

U1: Range ±100 mV;

(Minimum span 3 mV, Input resistance 20 kΩ min.)

U2: Range ±1000 mV;

INPUT SPECIFICATIONS

■ DC Current: Input resistor incorporated

■ DC Voltage: -10 – +10 V DC

Minimum span: 3 mV

(Minimum span 30 mV, Input resistance 20 kΩ min.)

U3: Range ±10 V;

(Minimum span 0.3 V,Input resistance 1 MΩ min.)

Offset: Max. 3 times span

Default setting will be used if not otherwise specified.

U1: 0 – 100 mV DC

OUTPUT 1

Voltage

U2: 0 – 1 V DC

6: 1 – 5 V DC (Load resistance 2000 Ω min.)

U3: 0 – 10 V DC

OUTPUT 2

Voltage

OUTPUT SPECIFICATIONS

With the input voltage code 6, U3 (0 % ≥ 0 V) and current,

6: 1 – 5 V DC (Load resistance 2000 Ω min.)

the output goes below 0 % when the input is open.

18KJV SPECIFICATIONS

ES-0462 Rev.2 Page 1/3

http://www.m-system.co.jp/

12 3

中文翻译

下载PDF

与18KJV-U366-R相关器件

型号	品牌	获取价格	描述	数据表
18KMS	MSYSTEM	获取价格	Rack-mounted DCS Signal Conditioners 18K-RACK
18KMS-66-R	MSYSTEM	获取价格	Rack-mounted DCS Signal Conditioners 18K-RACK
18KMS-66-R/S	MSYSTEM	获取价格	Rack-mounted DCS Signal Conditioners 18K-RACK
18KPP	MSYSTEM	获取价格	Rack-mounted DCS Signal Conditioners 18K-RACK
18KPP-122-R	MSYSTEM	获取价格	Rack-mounted DCS Signal Conditioners 18K-RACK
18KPP-122-R/S	MSYSTEM	获取价格	Rack-mounted DCS Signal Conditioners 18K-RACK
18KPP-222-R	MSYSTEM	获取价格	Rack-mounted DCS Signal Conditioners 18K-RACK
18KPP-222-R/S	MSYSTEM	获取价格	Rack-mounted DCS Signal Conditioners 18K-RACK
18KPP-322-R	MSYSTEM	获取价格	Rack-mounted DCS Signal Conditioners 18K-RACK
18KPP-322-R/S	MSYSTEM	获取价格	Rack-mounted DCS Signal Conditioners 18K-RACK

与18KJV-U366-R相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

18
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

12
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

43
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

38

产品中心

服务支持

精选活动

关于我们

帮助中心

18KJV-U366-R

18KJV-U366-R 数据手册

与18KJV-U366-R相关器件

与18KJV-U366-R相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

18KJV-U366-R

18KJV-U366-R 数据手册

与18KJV-U366-R相关器件

与18KJV-U366-R相关文章

您还可以找

您在本页遇到什么问题？