Type 168/185 Metallized Polyester Radial Lead Capacitorsꢀ
Radial Box Metallized Polyester Capacitors for Automatic Insertion ꢀ
The Type 168/185 series radial lead metallized polyester
box capacitors are available in bulk (Type 168) or on
ammo pack or tape and reel (Type 185). These capacitors
are constructed in rugged rectangular plastic cases and
all come with 5.0 mm (0.197“) lead spacing. They are
good for general purpose applications such as bypass,
decoupling, energy storage/discharge and arc suppres-
sion.
Highlightsꢀ
•
•
•
•
•
•
•
Case and epoxy fill meets UL94V-0
5.0 mm (0.197“) lead spacing
Bulk, tape and reel or ammo pack
Non-inductively wound
Non-polar
Low leakage
Lead material: Tinned copper wire
Specifications
RoHS Compliantꢀ
Capacitance Range: ꢀ
Voltage Range: ꢀ
Capacitance Tolerance:ꢀ
0.001 µF to 1.0 µFꢀ
50 Vdc to 400 Vdc (30 Vac to 200 Vac, 60 Hz) ꢀ
±5%, ±10%, ±20%ꢀ
Operating Temperature Range: ꢀ
Dielectric Withstand Voltage:ꢀ
Dissipation Factor (DF):ꢀ
–55 ºC to +125 ºC (with 50% Vdc derating >85 ºC)ꢀ
1.6 x rated voltage for 2 sec @ +25 ºC ±5 ºCꢀ
tanδ x 10 at 25 ºC ±5 ºCꢀ
–4
kHz
1
C ≤0.1 µF C > 0.1 µF
≤100
≤150
≤100
≤150
10
100
≤300
Approximately 7 nH
Total Self Inductance (L):
Long Term Stability (after two years):
Capacitance change ∆C/C ≤ ±3% under stan-
dard environmental conditions
Vn
50
V/µs
250
250
300
400
600
Maximum Pulse Rise Time (dv/dt):
63
100
250
400
If the working voltage (V) is less than the nominal voltage
(Vn), the capacitor can work at higher dv/dt. In this case, the
maximum value allowed is obtained by multiplying the above
value with the ratio Vn/V.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.comꢀ