0
Spartan-II/Spartan-IIE Family
OTP Configuration PROMs
(XC17S00A)
R
0
5
DS078 (v1.8) November 18, 2002
Advance Product Specification
Features
•
Configuration one-time programmable (OTP) read-only
memory designed to store configuration bitstreams for
Spartan-II/Spartan-IIE FPGA devices
•
•
•
•
Available in compact plastic 8-pin DIP, 8-pin VOIC,
20-pin SOIC, or 44-pin VQFP packages.
Programming support by leading programmer
manufacturers.
•
•
Simple interface to the Spartan device
Programmable reset polarity (active High or active
Low)
Design support using the Xilinx Alliance and
Foundation series software packages.
•
•
Low-power CMOS floating gate process
3.3V PROM
Guaranteed 20-year life data retention
Introduction
The XC17S00A family of PROMs provide an easy-to-use,
cost-effective method for storing Spartan-II/Spartan-IIE
device configuration bitstreams.
configuration. Once configured, it disables the PROM.
When a Spartan device is in Slave Serial mode, the PROM
and the Spartan device must both be clocked by an
incoming signal.
When the Spartan device is in Master Serial mode, it
generates a configuration clock that drives the Spartan
PROM. A short access time after the rising clock edge, data
appears on the PROM DATA output pin that is connected to
For device programming, either the Xilinx Alliance or the
Spartan device design file into a standard HEX format
which is then transferred to most commercial PROM
programmers.
the Spartan device D pin. The Spartan device generates
IN
the appropriate number of clock pulses to complete the
Spartan-II/IIE FPGA
Configuration Bits
197,696
Compatible Spartan-II/IIE PROM
XC17S15A
XC2S15
XC2S30
336,768
559,200
XC17S30A
XC2S50
XC17S50A
XC2S100
XC2S150
XC2S200
XC2S50E
XC2S100E
781,216
XC17S100A
1,040,096
1,335,840
630,048
XC17S150A
XC17S200A
XC17S50A
863,840
XC17S100A
(1)
XC2S150E
XC2S200E
XC2S300E
XC2S400E
XC2S600E
1,134,496
1,442,016
1,875,648
2,693,440
3,961,632
XC17S200A
XC17S200A
XC17S300A
(2)
XC17V04
(2)
XC17V04
Notes:
1. Due to the higher configuration bit requirements of the XC2S150E device, an XC17S200A PROM is required to configure this FPGA.
2. See XC17V00 series configuration PROMs data sheet at: http://direct.xilinx.com/bvdocs/publications/ds073.pdf
© 2002 Xilinx, Inc. All rights reserved. All Xilinx trademarks, registered trademarks, patents, and further disclaimers are as listed at http://www.xilinx.com/legal.htm. All other
trademarks and registered trademarks are the property of their respective owners. All specifications are subject to change without notice.
NOTICE OF DISCLAIMER: Xilinx is providing this design, code, or information "as is." By providing the design, code, or information as one possible implementation of this feature,
application, or standard, Xilinx makes no representation that this implementation is free from any claims of infringement. You are responsible for obtaining any rights you may
require for your implementation. Xilinx expressly disclaims any warranty whatsoever with respect to the adequacy of the implementation, including but not limited to any warranties
or representations that this implementation is free from claims of infringement and any implied warranties of merchantability or fitness for a particular purpose.
DS078 (v1.8) November 18, 2002
www.xilinx.com
1
Advance Product Specification
1-800-255-7778