Series 171 MicroStrips
Single Row Thru-Hole Board Mount Strips
171-004, 171-005, 171-006, and 171-007
Single Row Board Mount MicroStrips
These .050" pitch single row PCB thru-hole microstrips are available in four types-
vertical mount, right angle single row and two right angle staggered versions.
Available with 1 to 30 contacts. PC tails are .020" diameter. Optional latching
mechanism prevents de-mating. Guide pins provide circuit polarization. Contacts
are twistpin type and are gold-plated. Housing is molded LCP thermoplastic.
Suitable for high-reliability applications where long-term resistance to fretting
corrosion is a necessity. 3 A., 600 Vac, -55C to +150C.
171-006-7P-.125-P1CL
How To Order Single Row Thru-Hole PCB MicroStrips
Series
Number of
Cavities
Contact Type
PC Tail
Length
(Inches)
Optional
Guide Pin
Optional
Latch
Optional
Mounting
Holes
171-004
Right Angle,
Single Row PC
Tails
-1 TO -30
Total Number of
Cavities
including guide
pins,latches and
mounting holes.
P
.080
.110
.125
.150
.172
.190
.250
Omit
For No Guide Pin
Omit
For No Latch
Omit
For No Mounting
Holes
Pin Contacts
-P1
CL
Center Latch
MH
Mounting Holes
Guide Pin in Cav.
#1
The number of
cavities equals
the number of
electrical circuits
plus 1 cavity for
each guide pin
and latch, plus 6
cavities for the
mounting hole
option.
S
Tail Length In
Inches
171-005
Right Angle,
Two Row PC
Tails with .050"
Between Rows
Socket Contacts
BL
Latch at Both
Ends
The three cavities
on each end are
filled with epoxy.
Two .062" (1.57mm)
holes are cross-
drilled to allow for
attachment to a
-PB
Guide Pin at Both
Ends
mounting surface.
171-006
-P(X)
Replace (X)
with guide pin
location.
Right Angle,
Two Row PC
Tails with .100"
Between Rows
P3 shown below:
171-007
Vertical Mount
Sample Part Number
Q
171-006
-7
P
-.125
-P1
CL
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
Q-9