Document 110-1
5 mm Tunable Inductor
–
164,165 Series
• These tunables offer the compactness of a 5 mm coil and the
low drift reliability of an insert molded coil.
• Inductance values from 9 to over 280 nH
• Optional plated brass cans provide integral shielding.
• Can be ordered without cores for use as fixed inductors.
Designer’s Kit M305 contains 2 each of all parts
Core material Aluminum, 0.187″ (4.75 mm) long.
Terminations Leads: RoHS compliant tin-silver over copper. Other
terminations available at additional cost. Shield can tabs: Tin-silver
over nickel over brass
Weight
164 series unshielded: 0.16 – 0.31 g; with shield can: 0.45 – 0.60 g
165 series unshielded: 0.15 – 0.25 g; with shield can: 0.43 – 0.54 g
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C.
Packaging tubes: –40°C to +80°C
Resistance to soldering heat: Wave solder only. Recommended
maximum board surface temperature of 168°C (334°F) for no more
than three seconds. Pre-heating is recommended to minimize time
over the solder nozzle.
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
Two per billion hours / 1/2 billion hours, calculated per Telcordia SR-332
Packaging 50 parts per tube
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
3 TOOLS IN 1
TRITUNER SEE INDEX
TUNING WRENCH
0.139 0.005
3,53 0,13
Unshielded Styles
0.130 0.040
3,30 1,02
0.310 0.020
7,87 0,51
0.139 0.005
3,53 0,13
Start
0.018
0,46
dia
0.205 0.005
5,21 0,13
square
Shielded Styles
Recommended
Board Layout
0.212
5,38
Tab centers
0.340
max
0.120 0.010
3,05 0,25
Tab length
0.120
3,05
dia hole
8,64
0.0695
1,765
0.051
1,30
(for shield
can tabs)
Finish
165-XX
XXXX
C
L
0.0695
1,765
Part
marking
this side
0.031 0.010
0,79 0,25
0.106
2,69
0.038
0,965
Series
number
Internal
code
Dash
number
Start
C
L
0.230
5,84
square max
Document 110-1 Revised 08/31/09
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Singapore + 65-6484 8412 sales@coilcraft.com.sg