Mounting rail support
Support block
Mounting bases
TSTW, TST
Support block for TS 15, TS 32, TS 35
Mounting bases for TS 32 and TS 35
Material thickness 1.8 mm
and busbars
MOFU
TSTW
SH 1
for TS 15
FM
SH 2
for TS 32, TS 35
TSTW
MB
TST
TSTW mounting rail supports allow for sloped fitting of mount-
ing rails at an angle of 35°. Three designs are available with M5,
M6 threads or with a bore of Ø 4.3 mm.
The SH 1 and SH 2 support blocks enable construction of insu-
lated mounting rails.
Mounting bases are used to fix components onto mounting
rails. Weidmüller offers a polyamide mounting base and a steel
snap-on base for the TS 35 mounting rail. The FM 4 snap on
base fits all “top-hat” mounting rails. The PA mounting base fits
the TS 35 x 7.5 and the TS 35 x 15 slotted rails.
The TST mounting rail support allows rails to be fitted into fram-
es or above a cut-out. This design has an M5 or M6 thread (not
shown).
The sliding nut for TS 32 mounting rails has 2 tapped holes for
M 3 + M 5 / M 6 + M 4 / M 5 + M 3 screws. It is used to fix
components which cannot be directly mounted on the TS 32
and, in particular, to accept the smaller TS 15 “top-hat” rail. In
this way, for example, small terminals can first be mounted on
the TS 15 and this rail can then be mounted on the TS 32 with
the aid of the sliding nut together with the terminals.
Weidmüller offers hexagon socket fixing screws for the mount-
ing rail supports with a particularly low head allowing terminals
also to be fitted above the screw.
SH 2
Type
Cat. No.
Qty.
FM 4 (M 4) for TS 35
FM 5 (M 5) for TS 35
FM 6 (M 6) for TS 35
0687900000
0636800000
0636900000
1724580000
40
40
40
40
20
Type
Cat. No.
Qty.
Type
Cat. No.
Qty.
TSTW (M 5)
TSTW (M 6)
TSTW ø 4.3
TST (M 6)
TST (M 5)
0178100000 10
0164000000 10
1610110000 10
0101700000 10
1286600000 10
1779100000 10
SH 1 for TS 15
in PA (thermoplastics) compl.
SH 1 Base
0299860000
20 FM (Ø 4.2) for TS 35
MOFU mounting foot PA orange 0646260000 with bore
0401460000
0635960000
20 for TS 35 x 7.5 u. 35 x 15 gel.
500 MB 3/5 (cream)
0495660000 without bore 20
SH 1 Bracket
0503500000
20
20
20
with thread M 3 and M 5, for TS 32
TSTW (M 5), zinc-plated
Fixing screw
MB 6/4 (grey)
0334900000
Type
Cat. No.
Qty.
with thread M 6 and M 4, for TS 32
FKSC M 5x8 ø 9 hexagon socket SW 2.5 0295900000 50
SH 2 for TS 32/35
in KrG (thermosetting)
0494920000
10 MB 5/3 (black)
0553400000
FKSC M 6x8 ø 9 hexagon socket SW 3
FKSC M 6x12 ø 9 hexagon socket SW 3
0642600000 50
0353500000 50
with thread M 5 and M 3, for TS 32
261