15000W Transient Voltage Suppressor
15KPA-HF Series
Reverse Voltage: 17 to 280V
Peak Pulse Power: 15000 Watts
RoHS Device
Halogen Free
R-6
0.052(1.32)
0.048(1.22)
Features
DIA.
- Glass passivated chip.
1.0(25.4)
MIN.
- 15000W peak pulse power capability with a 10/1000µs
waveform, repetitive rate (duty cycle): 0.01%
- Low leakage.
- Uni and Bidirectional unit.
- Excellent clamping capability.
0.360(9.14)
0.340(8.64)
- Very fast response time.
0.360(9.14)
0.340(8.64)
DIA.
1.0(25.4)
MIN.
Mechanical Data
- Case: Molded plastic R-6.
- Epoxy: UL 94V-0 rate flame retardant
- Terminals: Solderable per MIL-STD-202,
method 208 guranteed.
Dimensions in inches and (millimeter)
- Polarity: Cathode band denoted cathode end
Circuit Diagram
except bipolar.
- Mounting position: Any.
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive loaded.
For capacitive load, derated current by 20%.
Symbol
Parameter
Value
Unit
Peak power dissipation with a 10/1000μs waveform (Note 1)
PPP
15000
W
Peak pulse current with a 10/1000μs waveform (Note 1)
IPP
PD
See Next Table
8.0
A
W
A
Power dissipation on infinite heatsink at TL=75°C
Peak forward surge current, 8.3ms single
half sine-wave unidirectional only (Note 2)
IFSM
500
Operating junction and storage temperature range
TJ, TSTG
-55 to +175
°C
Notes: 1. Non-repetitive current pulse, per fig.5 and derated above TA=25°C per Fig.1
2. Measured on 8.3 ms single half sine wave of equivalent square wave, duty cycle=4 pulses per minute maximum.
Company reserves the right to improve product design , functions and reliability without notice.
REV:A
Page 1
QW-JTV18
Comchip Technology CO., LTD.