Catalog: 1654001
Issue Date: 06.2011
Corcom Product Guide
Cost-effective Medium Performance Power Inlet Filter
EEJ Series
Including the EJH/EJHS, EJM/EJMS and EJS Models
UL Recognized
CSA Certified
VDE Approved*
20EJH1
3EEJ1
20EEJ8
EEJ Series
Specifications
• Compact EMI filter with IEC 60320-1 C14 Inlet
Maximum leakage current each Line to Ground:
EEJ/EJS
.22 mA
.38 mA
EJH
EJM
• Enhanced two element circuit provides medium
attenuation to 30MHz
@ 120 VAC 60 Hz:
@250 VAC 50 Hz:
2 A
.01 mA
5 A .017 mA
• Compact and cost-effective design
• Supersedes most ED Series versions
Hipot rating (one minute):
Line to Ground:
Line to Line:
2250 VDC
1450 VDC
3
• Includes 20A version with standard IEC 60320-1
C20 inlet
Rated Voltage (max.):
Operating Frequency:
Rated Current:
250 VAC
50/60 Hz
1 to 20A*
• Several termination styles
• Flanged mounting
Operating Ambient Temperature Range
EJS Models
(at rated current I ):
-10°C to +40°C
r
• Same performance as the EEJ Series
In an ambient temperature (T ) higher than +40°C
a
• Snap-in mounting
the maximum operating current (I ) is calculated as
o
• Several termination styles
follows: I = I (85-Ta)/45
o
r
• Includes 20A version with standard IEC 60320-1
C20 inlet
EJH & EJHS Models
Electrical Schematic
LINE
• Minimal leakage current suitable for patient-
contact medical applications
LOAD
• Flanged mounting the same as the EEJ Series
• Also available in snap-in versions (EJHS)
1
1
• Two element circuit provides modest EMI
attenuation above 1MHz
• Capacitive input (refer to the H Series for
capacitive output)
• EJHS models feature snap-in mounting
Note 1: Not present in EJH versions
EJM & EJMS Models
• Low leakage current, suitable for most medical
applications
*15A versions are tested by Underwriters Laboratories
to US and Canadian requirements and are
VDE approved at 10A, 250VAC
• Improved EMI attenuation up to 200MHz
20A versions are tested by Underwriters Laboratories
to US and Canadian requirements and are
VDE approved at 16A, 250VAC
• Mechanically the same as the EEJ Series with
flange or snap-in mounting
• EJMS models feature snap-in mounting
153
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com