15DMW4_S & 15DMW4_D Series
15W - Single/Dual Output - Wide Input - Isolated & Regulated
1“ x 1“ DC-DC Converter
DC-DC Converter
15 Watt
The 15DMW4_S & 15DMW4_D series are isolated 15W DC/DC conver-
ters. Designed with high efficiency, they allow the operating temperature
range of these units to be -40°C to +85°C (with derating) in a 6 pin DIP
package with industry-standard footprint. Further features include wide
4:1 input voltage range, remote on/off control, trimmable output, short-
circuit protection and over voltage protection.
Wide 4:1 input voltage range
High efficiency up to 88%
Remote On/Off
Input/output isolation voltage:
1.5K VDC
Operating temperature range:
-40°C to +85°C
100% burned in
15W DIL package
RoHS compliant
Short circuit protection (SCP)
Customer design available
These converters are well suitable for battery operated equipment, mea-
surement equipment, telecom, wireless network, Industry control sys-
tem, everywhere where isolated, tightly regulated voltages and compact
size are required.
Common specifications
Short circuit protection:
Cooling:
Input specifications
Hiccup, continuous, automatic recovery
Free air convection
-40°C~+85°C (with derating)
-55°C~+125°C
Item
Test condition
Pi Type
Min
Typ
Max
Units
Input filter
Protection
Starting voltage
Operation temperature range:
Storage temperature range:
Maximum case temperature:
Switching frequency (fixed):
Storage humidity range:
Case material:
Fuse recommended
• 24VDC input
• 48VDC input
8.7
16.9
9
18
VDC
VDC
105°C MAX
Under-voltage turn-off • 24VDC input
• 48VDC input
8.3
16.2
9
18
VDC
VDC
400kHz TYP
95ꢀ MAX
Surge voltage
(100msec. max.)
• 24VDC input
• 48VDC input
50
100
V
V
Nickel-coated copper (six-sided)
Non-conductive FR4
Epoxy (UL94V-0)
Remote ON/OFF
• Converter: ON
• Converter: OFF
Open or 3.0V<Vr<15V
Base material:
Short circuit pin 6 and pin 2
or 0V<Vr<1.2V
Potting material:
• Off idle current
2.5
mA
MTBF (MIL-HDBK-217F @25°C):
Weight:
560,000 hours
Reflected input ripple
current
30
mA
16.5g
Conducted noise
(input)
EN 55022 level A, FCC part 15, level A with
external capacitor
Isolation specifications
Output specifications
Item
Test condition
Input to output
Test at 500VDC
Min
Typ
Max
Units
Item
Test condition
Min
Typ
Max
2
Units
ꢀ
Isolation voltage
Isolation resistance
Isolation capacitance
1500 VDC
Voltage tolerance
Line regulation
Load regulation
1000
MΩ
Vmin - Vmax
0.5
ꢀ
1000
pF
• 25ꢀ load to full load
• Balanced load (dual)
0.5
1
ꢀ
ꢀ
Model selection:
WCTV_xxyyN##
Load variation
Dual models
unbalanced load
5
ꢀ
W= Watt; C=Case; T= Type; V= Voltage Variation (omitted 10ꢀ);
xx= Vin; yy= Vout; N= Numbers of Output; ##= Isolation (kVDC)
Output voltage
adjustment range
only for single output
models
10
ꢀ
Example:
15DMW4_2415S1.5
15= 15Watt; D= DIP; M=series; W4= wide input (4:1) 9-36Vin;
15Vout; S= single output; 1.5=1500VDC
Temperature drift
Ripple and noise
Vout
0.02 ꢀ/°C
20MHz Bandwidth
100
mVp-p
Output current
limitation
at 150 ꢀ typ.of Iout
max., constant current
Transient response 25ꢀ load step change
setting time
300
µs
Note:
1. Only typical model listed. Non-standard models will be different from the above,
please contact us for more details.
Transient response di/dt=0.8A/µs
over shoot
≤ 5ꢀ of Vo
(≤ 6ꢀ for 3.3Vout)
2. All specifications are measured at TA=25°C, humidity<75ꢀ, nominal input
voltage and rated output load unless otherwise specified.
3. In this datasheet, all the test methods of indications are based on corporate
standards.
Start-up time
Nominal Vin and
450
ms
ꢀ
constant resistive load
Over load
protection
ꢀ of full load at
nominal input
110
Over voltage
protection
• 3.3V output
• 5V output
• 12V output
• 15V output
3.7
5.6
13.5
16.8
5.4
7
19.6
20.5
VDC
VDC
VDC
VDC
Page 1 of 3
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
15DMW4_S & 15DMW4_D – Rev. 2016-1.0
Specifications subject to change without notice.