152D
Vishay Sprague
www.vishay.com
Solid-Electrolyte TANTALEX™ Capacitors,
Extended Capacitance Values, Hermetically-Sealed
FEATURES
• Axial through-hole terminations:
tin / lead (SnPb), 100 % tin (RoHS-compliant)
Available
• High capacitance and small size
Available
• Exceptional operating stability
• Hermetically-sealed, cylindrical, metal-case
• Low leakage current and low dissipation factor
• The military equivalent of the 152D is the M39003/03 (style
CSR23) which is qualified to MIL-PRF-39003/3
• Provide proven reliability in a wide variety of high
performance military, industrial and commercial markets
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
PERFORMANCE CHARACTERISTICS
Operating Temperature: -55 °C to +85 °C
(to +125 °C with voltage derating)
At +125 °C: leakage shall not exceed 12 times the values
listed in the Standard Ratings table
Capacitance Tolerance: at 120 Hz, +25 °C
Life Test: capacitors shall withstand rated DC voltage
applied at +85 °C for 2000 h or derated DC voltage applied
at +125 °C for 1000 h
20 % and 10 % standard. 5 % available as special
Dissipation Factor: at 120 Hz, +25 °C
Dissipation factor, as determined from the expression
2πfRC, shall not exceed the values listed in the Standard
Ratings table
Following the life test:
1. DCL shall not exceed 125 % of the initial requirement. In
no case need the leakage current be less than 2 μA
DC Leakage Current (DCL Max.):
at +25 °C: leakage current shall not exceed the values listed
in the Standard Ratings table
2. Dissipation factor shall meet the initial requirement
3. Change in capacitance shall not exceed 5 %
at +85 °C: leakage current shall not exceed 10 times the
values listed in the Standard Ratings table
ORDERING INFORMATION
152D
106
X0
006
A
2
T
E3
MODEL
CAPACITANCE
CAPACITANCE DC VOLTAGE RATING
CASE
CODE
STYLE
NUMBER
PACKAGING
RoHS-
COMPLIANT
TOLERANCE
AT +85 °C
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third
is the number of
zeros to follow.
X0 = 20 %
X9 = 10 %
X5 = 5 % *
* Special order
This is expressed in
volts. To complete the
three-digit block,
zeros precede the
voltage rating.
See
Ratings
and Case
Codes
table
2 = insulated
sleeve
B = bulk
T = tape
and reel
G = ammo
pack
E3 = 100 % tin
termination
(RoHS-compliant)
Blank = SnPb
termination
Revision: 17-Aug-2020
Document Number: 40016
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000