152D
Vishay Sprague
www.vishay.com
®
Solid-Electrolyte TANTALEX Capacitors,
Extended Capacitance Values, Hermetically-Sealed
FEATURES
• Axial through-hole terminatons: Tin/lead
(SnPb), 100 % tin (RoHS compliant)
• High capacitance and small size
• Exceptional operating stability
• Hermetically-sealed, cylindrical, metal-case
• Low leakage current and low dissipation
factor
• The military equivalent to the 152D is the CSR23 which is
qualified to MIL-C-39003/03
• Provide proven reliability in a wide variety of high
performance military, industrial and commercial markets
• Material categorization: For definitions please see
www.vishay.com/doc?99912
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
(to + 125 °C with voltage derating)
At + 85 °C: Leakage current shall not exceed 10 times the
values listed in the Standard Ratings table
Capacitance Tolerance: At 120 Hz, + 25 °C
20 % and 10 % standard. 5 % available as special
At + 125 °C: Leakage shall not exceed 12 times the values
listed in the Standard Ratings table
Dissipation Factor: At 120 Hz, + 25 °C
Dissipation factor, as determined from the expression
2fRC, shall not exceed the values listed in the Standard
Ratings table
DC Leakage Current (DCL Max.):
At + 25 °C: Leakage current shall not exceed the values
listed in the Standard Ratings table
Life Test: Capacitors shall withstand rated DC voltage
applied at + 85 °C for 2000 h or derated DC voltage applied
at + 125 °C for 1000 h
Following the life test:
1. DCL shall not exceed 125 % of the initial requirement. In
no case need the leakage current be less than 2 µA
2. Dissipation factor shall meet the initial requirement
3. Change in capacitance shall not exceed 5 %
ORDERING INFORMATION
152D
106
X0
006
A
2
T
E3
MODEL
CAPACITANCE
CAPACITANCE DC VOLTAGE RATING
CASE
CODE
STYLE
NUMBER
PACKAGING
RoHS
COMPLIANT
TOLERANCE
AT 85 °C
This is expressed
in picofarads. The
first two digits are
the significant
X0 = 20 %
X9 = 10 %
X5 = 5 % *
* Special order
This is expressed in
volts. To complete the
three-digit block,
zeros precede the
voltage rating.
See
Ratings
and Case
Codes
table
2 = Insulated
sleeve
T = Tape
and reel
E3 = 100 % tin
termination
(RoHS compliant)
Blank = SnPb
termination
figures. The third
is the number of
zeros to follow.
DIMENSIONS in inches [millimeters]
1.500 0.250
[38.10 ꢀ.35]
1.500 0.250
[38.10 ꢀ.35]
D
dia.
L
Positive lead
+
-
Solid tinned
nickel leads
0.047 [1.19] max.
0.125 [3.18] max.
J max.
D
L
LEAD SIZE
J
CASECODE
WITH INSULATING SLEEVE (1)
AWG NO.
NOMINALDIAMETER
0.020 [0.51]
(MAXIMUM)
A
B
R
S
0.135 0.016 [3.43 0.41] 0.286 0.031 [7.26 0.79]
0.185 0.016 [4.70 0.41] 0.474 0.031 [12.04 0.79]
0.289 0.016 [7.34 0.41] 0.686 0.031 [17.42 0.79]
0.351 0.016 [8.92 0.41] 0.786 0.031 [19.96 0.79]
0.422 [10.72]
0.610 [15.49]
0.822 [20.88]
0.922 [23.42]
24
24
22
22
0.020 [0.51]
0.025 [0.64]
0.025 [0.64]
Note
(1)
When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body
Revision: 09-Mar-12
Document Number: 40016
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000