®
AC/Motor Run
Film Capacitors
ICEL M
5%
1
5
µ
F
AB
40
0VAC
320VAC
A
C
EN 60252
MAB
• SMPS
• Motor Run
• High Frequency Electronic Ballasts
• Motor Speed Controls
• General Purpose AC application
• Switching Capacitor for Industrial Controls
Operating Temperature
Range
-40˚C to +105˚C without use of approvals
-25˚C to +85˚C for use of approvals
Capacitance Tolerance
+/- 10% at 1kHz, 20˚C
See Voltage Code Table
Rated Voltage
Voltage must be derated by 1.25% per °C exceeding 85°C.
2.2µF<C≤15µF
15µF<C≤22µF
C≤ 2.2µF
Freq (kHz)
1
C>22µF
.14%
Dissipation Factor
(max) at 20˚C.
.06%
.1%
.12%
Insulation Resistance
@20˚C(<70% RH)
for 1 minute at 100VDC
> 10,000MΩ x µF for C<1µF.
> 30,00MΩ x µF for C≥1µF.
160% of rated VAC for 60 seconds at 20˚C between leads.
200% of rated VAC for 60 seconds at 20˚C between leads
for EN 60252-1 approval.
Dielectric Strength
Self Inductance
3KV at 60HZ for 60 seconds between leads and case.
<1nH/mm of lead spacing and lead wire length.
Capacitance Drift
<1.0% up to 40˚C after 2 years
-200ppm/˚C +/- 100ppm/˚C
Temperature Coefficient
125% of rated voltage at +85°C
Load Life Test
Capacitance Change ≤3%
200 hrs. for Class D (1000 hours expected life, continuous service)
600 hrs. for Class C (3000 hours expected life, continuous service)
2000 hrs. for Class B (10000 hours expected life, continuous service)
6000 hrs. for Class A (30000 hours expected life, continuous service)
Dielectric
Electrodes
Construction
Leads
Polypropylene
Vacuum Deposited Metal Layers
Metallized Film
Solid or Stranded Tinned Copper Wire
Solvent resistant plastic box (UL 94-V1) with epoxy fills (UL 94V-0)
Coating
®
3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com
182