Tentative
No.804G / Mar.2012
Miniature Aluminum Electrolytic Capacitors
Engineering Bulletin
Low impedance, 105℃
●
●
●
●
●
Adoption of innovative electrolyte and new technologies
Very low impedance at high frequency
Endurance with ripple current: 4,000 to 7,000 hours at 105℃
Solvent resistant type
RoHS Compliant
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-
55 to +105℃
Rated Voltage Range 6.3 to 35Vdc
(at 20℃, 120Hz)
Capacitance Tolerance
Leakage Current
±
20% (M)
I=0.01CV or 3µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20℃ after 2 minutes)
(at 20℃, 120Hz)
(at 120Hz)
Dissipation Factor
(tanδ)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V
0.22 0.19 0.16 0.14 0.12
tanδ(Max.)
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
6.3V 10V 16V 25V 35V
Rated voltage (Vdc)
Z( 55℃)/Z(+20℃)
Low Temperature
Characteristics
(Max. Impedance Ratio)
4
3
3
3
3
-
Endurance
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105
℃.
Time
φ
10 : 4,000hoursꢀ φ12.5 : 5,000hoursꢀ φ16 to 18 : 7,000hours
6.3 to 10Vdc( 10) 12.5 to18)
6.3 to 10Vdc(
≦± 20% of the initial value
Rated voltage
Capacitance change
D.F.(tanδ)
φ
φ
16 to 35Vdc
≦± 20% of the initial value
≦± 30% of the initial value
≦300% of the initial specified value
≦200% of the initial specified value
The initial specified value
≦
200% of the initial specified value
The initial specified value
Leakage current
≦The initial specified value
≦
≦
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Rated voltage
Capacitance change
D.F.(tanδ)
6.3 to 10Vdc(
φ
10)
6.3 to 10Vdc(
φ
12.5 to18)
16 to 35Vdc
≦± 30% of the initial value
≦± 20% of the initial value
≦± 20% of the initial value
≦
300% of the initial specified value
The initial specified value
≦
200% of the initial specified value
The initial specified value
≦
200% of the initial specified value
The initial specified value
Leakage current
≦
≦
≦
◆DIMENSIONS [mm]
●
Terminal Code : E
Sleeve (PET : Dark blue)
φD
φd
F
10
0.6
5.0
12.5
0.6
5.0
16
0.8
7.5
18
0.8
7.5
φD'
L'
φD+0.5max.
L+1.5max.
L'
15min.
4min.
(φ10)
(φ12.5 toφ18)
Gas escape end seal
Vent
◆
PART NUMBERING SYSTEM
1
2
3
4
5
6
7
8
9
10
11 12 13
14
15 16 17
18
E L Z A A A A E A A A A A M A A A S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 680µF:681, 2,200µF:222)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3, 25V:250)
Series code
Category
Specifications in this bulletin are subject to change without notice.
1
NIPPON CHEMI-CON CORPORATION
1556