Document 893-1
High Frequency, High Current Power Inductors
• Excellent Q factors – up to 230 at 400 MHz!
• Current handling as high as 57 Amps
• Inductance values from 22 to 257 nH
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver over copper
Ambient temperature –40°C to +125°C with Irms current, +125°C to
+145°C with derated current
Storage temperature Component: –40°C to +145°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
MeanTime Between Failures (MTBF) 1 billion hours
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Irms (A)5
Inductance2
±±20
Q test
freq
(MHz)
DCR
Q3
typ
SRF typ4
(MHz)
±2°C
42°C
rise
Weight
(g)
(mOhm)
typ
Part number1
(nH)
max
rise
1010VS-23NME_
1010VS-46NME_
1010VS-79NME_
1010VS-111ME_
1010VS-141ME_
23.5
46.5
79.0
111
95
150
135
150
140
100
100
50
50
50
923
526
386
382
433
1.05
1.50
1.95
2.53
3.08
1.20
1.62
2.11
2.73
3.33
18.0
17.9
17.8
15.7
14.1
26.0
25.5
25.0
22.0
19.3
0.49
0.65
0.82
0.98
1.23
146
1212VS-22NME_
1212VS-42NME_
1212VS-66NME_
1212VS-90NME_
1212VS-111ME_
22.0
42.0
66.0
90.0
117
200
195
200
175
165
100
50
50
50
50
918
557
480
444
399
0.48
0.70
0.90
1.10
1.30
0.55
0.77
0.99
1.21
1.43
40.5
38.0
35.0
33.0
32.0
57.0
52.0
48.0
45.0
44.0
2.20
2.70
3.20
3.70
4.20
2014VS-33NME_
2014VS-66NME_
2014VS-111ME_
2014VS-151ME_
2014VS-201ME_
2014VS-251ME_
33
66
108
155
202
257
230
200
210
205
200
200
100
50
50
50
50
50
620
413
320
296
262
230
0.63
0.90
1.20
1.44
1.70
1.94
0.74
1.00
1.34
1.60
1.82
2.15
32.5
31.5
31.0
29.4
26.3
24.9
43.0
42.5
42.0
39.7
35.8
34.5
1.60
2.30
3.10
3.60
4.40
5.00
1. When ordering, specify packaging code:
±214VS-±51MEC
2. Inductance measured at 1.0 MHz, 0.1 Vrms, 0 A using an Agilent/HP
HP4291A impedance analyzer with an Agilent/HP 16193A test fixture or
equivalents.
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
3. Q measured at the specified frequency using an Agilent/HP 4291A
impedance analyzer or equivalent.
tape.
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
4. SRF measured using an Agilent/HP 8753 network analyzer or equivalent
and a Coilcraft CCF1199 test fixture
5. Current that causes the specified temperature rise from 25°C ambient.
6. Electrical specifications at 25°C.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 893-1 Revised 01/23/13
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.