MODEL: 10PV
5: 0 – 5 V DC (Load resistance 500 Ω min.)
High-density Signal Conditioners 10-RACK
6: 1 – 5 V DC (Load resistance 500 Ω min.)
P/I TRANSDUCER
Functions & Features
[3] OUTPUT 2
0: None
• Converting a standard pneumatic signal into a
proportional DC output
Voltage
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
• Optional second channel output available at the front
terminals and at the Standard Rack connector
POWER INPUT
DC Power
Typical Applications
• Converting a pneumatic system into a 4 – 20 mA for
indicating and controlling in DCS system
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
[4] OPTIONS (multiple selections)
Pressure Range
blank: 0.2 - 1.0kgf/cm
/A1S: 19.6 – 98.1 kPa
/A2S: 20 – 100 kPa
2
/A3S: 20.7 – 103.4 kPa
/A2: 0.2 – 1.0 bar
/A3: 3 – 15 psig
Other Options
MODEL: 10PV-[1][2][3]-R[4]
blank: none
/Q: Option other than the above (specify the specification)
ORDERING INFORMATION
• Code number: 10PV-[1][2][3]-R[4]
Specify a code from below for each [1] through [4].
(e.g. 10PV-2A6-R/A2S/Q)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
• Specify the specification for option code /Q
(e.g. /C01)
/C02: Polyurethane coating
/C03: Rubber coating
[1] PNEUMATIC CONNECTION
2: Rc 1/4"
GENERAL SPECIFICATIONS
Construction: Rack-mounted; terminal access via screw
terminals at the front and via card-edge connector at the
rear
5: Rc 1/8" fitting
7: 1/4" NPT fitting
Connection
Output: M3.5 screw terminals (torque 0.8 N·m) and card-
edge connector
[2] OUTPUT 1
Current
Pneumatic: Rc 1/4", Rc 1/8" or 1/4" NPT female (torque
≤12 N·m)
A: 4 – 20 mA DC (Load resistance 600 Ω max.)
B: 2 – 10 mA DC (Load resistance 1200 Ω max.)
C: 1 – 5 mA DC (Load resistance 2400 Ω max.)
D: 0 – 20 mA DC (Load resistance 600 Ω max.)
E: 0 – 16 mA DC (Load resistance 750 Ω max.)
F: 0 – 10 mA DC (Load resistance 1200 Ω max.)
G: 0 – 1 mA DC (Load resistance 12 kΩ max.)
Voltage
Power input: Supplied from card-edge connector
Material
Housing: Flame-resistant resin (black)
Base: Die cast aluminium
Screw terminals: Nickel-plated steel
Isolation: Output 1 to output 2 to power
Overrange output: Approx. -10 to +120 % at 1 – 5 V
Zero adjustment: -5 to +5 % (front)
Span adjustment: 95 to 105 % (front)
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)
3: 0 – 1 V DC (Load resistance 100 Ω min.)
4: 0 – 10 V DC (Load resistance 1000 Ω min.)
http://www.m-system.co.jp/
10PV SPECIFICATIONS
ES-0820 Rev.11 Page 1/3