5秒后页面跳转
10JFX-H6-R/C01 PDF预览

10JFX-H6-R/C01

更新时间: 2024-11-29 02:44:47
品牌 Logo 应用领域
爱模 - MSYSTEM /
页数 文件大小 规格书
3页 93K
描述
High-density Signal Conditioners 10-RACK

10JFX-H6-R/C01 数据手册

 浏览型号10JFX-H6-R/C01的Datasheet PDF文件第2页浏览型号10JFX-H6-R/C01的Datasheet PDF文件第3页 
MODEL: 10JFX  
(Minimum span 3 mV, Input resistance 20 kΩ min.)  
High-density Signal Conditioners 10-RACK  
U2: Range ±1000 mV;  
(Minimum span 30 mV, Input resistance 20 kΩ min.)  
U3: Range ±10 V;  
LINEARIZER  
(field-programmable)  
(Minimum span 0.3 V,Input resistance 1 MΩ min.)  
Functions & Features  
• Accepting non-linear input and providing two linearized  
outputs, proportional to the process variables  
• Micro-processor based  
[2] OUTPUT 1  
Current  
A: 4 – 20 mA DC (Load resistance 600 Ω max.)  
Voltage  
• On-site calibration up to 16 points using a hand-held  
programmer PU-2x  
6: 1 – 5 V DC (Load resistance 500 Ω min.)  
• Field-programmable input range  
• Optional second channel output available at the front  
terminals and at the Standard Rack connector  
[3] OUTPUT 2  
0: None  
Typical Applications  
Voltage  
• V-notch weir  
6: 1 – 5 V DC (Load resistance 5000 Ω min.)  
• Gas analyzer  
• Irregular-shaped tank level input for volume calculation  
POWER INPUT  
DC Power  
R: 24 V DC  
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)  
[4] OPTIONS  
blank: none  
/Q: With options (specify the specification)  
SPECIFICATIONS OF OPTION: Q  
COATING (For the detail, refer to M-System's web site.)  
/C01: Silicone coating  
/C02: Polyurethane coating  
MODEL: 10JFX–[1][2][3]–R[4]  
/C03: Rubber coating  
ORDERING INFORMATION  
• Code number: 10JFX-[1][2][3]-R[4]  
Specify a code from below for each [1] through [4].  
(e.g. 10JFX-6A6-R/Q)  
RELATED PRODUCTS  
• Programming Unit (model: PU-2x)  
• PC configurator software (model: JXCON)  
Downloadable at M-System’s web site.  
A dedicated cable is required to connect the module to the  
PC. Please refer to the internet software download site or  
the users manual for the PC configurator for applicable  
cable types.  
• Special input range (For codes U1, U2 & U3)  
• Linearization data (max. 16 points)  
Use Ordering Information Sheet (No. ESU-1669) to specify  
linearization data when the I/O signals are nonlinear.  
• Specify the specification for option code /Q  
(e.g. /C01)  
GENERAL SPECIFICATIONS  
Construction: Rack-mounted; terminal access via screw  
terminals at the front and via card-edge connector at the  
rear; terminal cover provided  
[1] INPUT  
Current  
A: 4 – 20 mA DC (Input resistance 250 Ω)  
H: 10 – 50 mA DC (Input resistance 100 Ω)  
Voltage  
Connection  
Input: M3.5 screw terminals (torque 0.8 N·m)  
Output: Card-edge connector and M3.5 screw terminals  
(torque 0.8 N·m)  
6: 1 – 5 V DC (Input resistance 1 MΩ min.)  
U1: Range ±100 mV;  
http://www.m-system.co.jp/  
10JFX SPECIFICATIONS  
ES-0872 Rev.10 Page 1/3  

与10JFX-H6-R/C01相关器件

型号 品牌 获取价格 描述 数据表
10JFX-H6-R/C02 MSYSTEM

获取价格

High-density Signal Conditioners 10-RACK
10JFX-H6-R/C03 MSYSTEM

获取价格

High-density Signal Conditioners 10-RACK
10JFX-U10-R MSYSTEM

获取价格

High-density Signal Conditioners 10-RACK
10JFX-U10-R/C01 MSYSTEM

获取价格

High-density Signal Conditioners 10-RACK
10JFX-U10-R/C02 MSYSTEM

获取价格

High-density Signal Conditioners 10-RACK
10JFX-U10-R/C03 MSYSTEM

获取价格

High-density Signal Conditioners 10-RACK
10JFX-U16-R MSYSTEM

获取价格

High-density Signal Conditioners 10-RACK
10JFX-U16-R/C01 MSYSTEM

获取价格

High-density Signal Conditioners 10-RACK
10JFX-U16-R/C02 MSYSTEM

获取价格

High-density Signal Conditioners 10-RACK
10JFX-U16-R/C03 MSYSTEM

获取价格

High-density Signal Conditioners 10-RACK