MODEL: 10ABS
High-density Signal Conditioners 10-RACK
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
ANALOG BACKUP SWITCHER
Functions & Features
/C02: Polyurethane coating
/C03: Rubber coating
• Changing control from DCS output to manual operation
• Control output selectable by an external switch
GENERAL SPECIFICATIONS
Construction: Rack-mounted; terminal access via screw
terminals at the front and via card-edge connector at the
rear; terminal cover provided
Typical Applications
• Enabling manual operation of valves
Connection
Input: M3.5 screw terminals (torque 0.8 N·m)
Output: M3.5 screw terminals (torque 0.8 N·m)
Power input: Supplied from card-edge connector
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (black)
Isolation: Input or output to power
Indicator LED: Light turns on during DCS control
INPUT SPECIFICATIONS
Input: control output of the DCS; 4 – 20 mA DC
MODEL: 10ABS–AA–R[1]
OUTPUT SPECIFICATIONS
Output: 4 – 20 mA DC
Relay mechanical life: 5 x 10 cycles
7
ORDERING INFORMATION
• Code number: 10ABS-AA-R[1]
Specify a code from below for [1].
(e.g. 10ABS-AA-R/Q)
INSTALLATION
Current consumption: Approx. 40 mA
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Standard Rack 10BXx
• Specify the specification for option code /Q
(e.g. /C01)
Weight: 150 g (0.33 lb)
INPUT
Current
A: 4 – 20 mA DC
PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(input or output to power)
OUTPUT
Current
1500V AC @1 minute (input or output to ground)
A: 4 – 20 mA DC
POWER INPUT
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
[1] OPTIONS
blank: none
/Q: With options (specify the specification)
http://www.m-system.co.jp/
10ABS SPECIFICATIONS
ES-0884 Rev.7 Page 1/2