10ACBE_4 Series
10W - Single/Dual Output AC-DC Converter - Universal Input - Isolated & Regulated
AC-DC Converter
10 Watt
Universal input: 85~264VAC,
100~370VDC
Over current protection
Short circuit protection (SCP)
Over voltage protection
Meets IEC62368, UL62368,
EN62368 standards
The 10ACBE_4 series is a compact size power converter offered by
Gaptec. It features universal input voltage, taking both DC and AC input
voltage, low power consumption, high efficiency, high reliability, safer
isolation. It offers good EMC performance, which meet IEC/EN61000-4,
CISPR32/EN55032, UL62368 and EN62368 standards, and it’s widely used
in industrial, office and civil applications. For harsh EMC environment,
the application circuit in the datasheet is strongly recommended.
Regulated output, low ripple
and noise
High efficiency up to 82%
Plastic case, meets UL94V-0
PCB mounting, chassis
mounting, DIN rail mounting
UL-62368-1 (E347551)
Certification
Model*
Output power
[W]
Output
[Vo]
Output
[mA]
Capacitive Load
[µF, max]
Efficiency
[%, typ]
UL/CE/CB
UL/CE/CB
UL/CE/CB
UL/CE/CB
UL/CE/CB
UL/CE/CB
10ACBE_03S4
10ACBE_05S4
10ACBE_09S4
10ACBE_12S4
10ACBE_15S4
10ACBE_24S4
6.6
10
10
10
10
10
3.3
5
2000
2000
1100
900
27000
9500
3600
2400
1200
470
70
76
78
80
81
9
12
15
24
700
450
82
* Add suffix CM for Chassis mounting with screw terminals (f.ex. 10ACBE_03S4CM) or suffix DR for DIN rail mounting (f.ex. 10ACBE_03S4DR).
See different package measurements at mechanical specifications.
Input specifications
Input voltage range
Input frequency
Input current
Output specifications
Voltage accuracy
Input variation
85~264VAC, 100~370VDC
47~63Hz
2%; 3.3V output voltage: 3%
0.5% (main output)
1.5% (supplement output)
115VAC
• 0.26A (max)
230VAC
• 0.16A (max)
Line regulation (full load)
Load regulation (0% to 100%)
Minimum load
0.5%
1%
Inrush current
115VAC
• 13A (typ)
230VAC
• 23A (typ)
0%
Leakage current
0.3mA RMS typ./230VAC/50Hz
Ripple & Noise (p-p)
20MHz Bandwidth:
50mV (typ), 100mV (max)
Recommended External
Input Fuse
• 2A/250V
• slow fusing
Short circuit protection
Over current protection
Continuous, and auto resume
≥110% IO self-recovery
Hot plug
Unavailable
Output over-voltage protection
• 3.3/5VDC models
• 9VDC models
• 12/15VDC models
• 24VDC models
• ≤7.5VDC
• ≤15VDC
• ≤20VDC
• ≤30VDC
Example:
10ACBE_05S4
10= 10Watt; AC= AC-DC; B= series; E= Cost effective; 5Vout;
S= Single Output; 4= 4kVAC
Hold-up time
Vin=115VAC: 15ms TYP
Vin=230VAC: 80ms TYP
Temperature coefficient
0.02%/°C
Note:
1. Unless otherwise specified, parameters in this datasheet were measured under
the conditions of Ta = 25°C, humidity <75% with nominal input voltage and
rated output load;
2. All index testing methods in this datasheet are based on our Company’s
corporate standards;
3. We can provide product customization service, please contact our technicians
directly for specific information;
4. Products are related to laws and regulations: see „Features“ and „EMC“;
5. Our products shall be classified according to ISO14001 and related environmen-
tal laws and regulations, and shall be handled by qualified units.
Page 1 of 5
10ACBE_4 – Rev. 2020-1.2
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com