PenMount 6500 combo board, USB and RS232 Interface
PenMount 6500, one of PenMount’s newest innovation, the ultimate combo board. A collectively
integrated features and functions of auto detecting USB and RS232 serial interfaces supporting
4, 5 & 8 wire resistive touch screens; complemented by the superbly developed PenMount driv-
ers with auto installation driver capability.
PenMount 6500 control board using PenMount 6000 controller that has been designed for those
who may like and all-in-one solution with 10-bit A/D converter built-in to make the total printed cir-
cuit board denser, circuit diagram also designed for 12-bit ADC for optional. There are two con-
nectors on this board, one connector is for 4, 5, 8-wire touch screen cable (optional), and another
is for 4-pin USB A type cable.
Electrical Specifications
Touch Screen:
For 4-, 5-, 8-wire analog resistive type
Communications:
USB, full speed, 12MHz
RS232, 19200 / 9600 baud rate
Touch Screen Controller:
Resolution:
Size:
PenMount 6000 microcontroller
2048x2048 (optional up to 4096 x 4096)
60x26 mm, two 3mm Ø screw holes
Support 90° 180° and 270° screen rotation
Portrait:
Calibration data:
data saved into Chip and also into register file
LED on board
Diagnostic:
Operating Voltage
+5V DC for USB / +5V~12V DC for RS232
(4/8-wire touch panel use for 5V to 12V DC
5-wire touch panel only use for 5V DC)
Storage Temperature Range
Operating Temperature
-40°C ~ 85°C
-20°C ~ 70°C
Changes that contribute to technical improvement are subject to alternations
2007
Datum Name
Bearb. 05.04. Maurer
Touch Controller Board
Gepr.
Vert.
05.04. Maurer
USB & RS232
4-, 5-, 8-wire
SPEZIFICATIONS
EDV-Datasheet
PenMount 6500 combo
don’t change manually
Manufactured by Apex Material Technology Corp.
H 1070,0048.01-.04
Zu Änd.
Datum
Name
D 79346 Endingen
page 1 of 3
Index: