Model 100
Vishay Spectrol
1 5/16" (33.3 mm) Single Turn Wirewound
Precision Potentiometer
FEATURES
• Gangable up to 6 sections
• Extra taps on request
RoHS
COMPLIANT
• Bushing and servo mount types available
• Ohmic value range: 5 Ω up to 35 kΩ
ELECTRICAL SPECIFICATIONS
PARAMETER
STANDARD
5 Ω to 20 kΩ
3 ꢀ
SPECIAL
to 35 kΩ
ꢁ ꢀ
Total Resistance:
Tolerance: 50 Ω and Above
Below 50 Ω
5 ꢀ
3 ꢀ
Linearity x total applied voltage for total resistance above 20 Ω.
2.0 ꢀ of total applied voltage for 20 Ω and below
End Voltage
Linearity (Independent):
5 Ω to ꢁ00 Ω
ꢁ00 Ω to 500 Ω
500 Ω to 3 kΩ
3 kΩ to ꢁ5 kΩ
ꢁ5 kΩ and above
STANDARD
ꢁ.0 ꢀ
BEST PRACTICAL
0.50 ꢀ
0.5 ꢀ
0.5 ꢀ
0.5 ꢀ
0.5 ꢀ
0.35 ꢀ
0.25 ꢀ
0.20 ꢀ
0.ꢁ5 ꢀ
Noise
ꢁ00 Ω ENR (MIL-R-ꢁ2934)
352° 2°
Electrical Angle
Power Rating
Insulation Resistance
Dielectric Strength
Taps (Extra)
2.75 W at 40 °C ambient
ꢁ00 MΩ min, 500 VDC
ꢁ000 VRMS, 60 Hz
Up to ꢁ3 (position tolerance: ꢁ°)
CCW taps of multiple sections aligned with
CCW tap of section ꢁ to ꢁ°
Phasing
Absolute Minimum Resistance
Linearity x total resistance or 0.5 Ω, whichever is greater
ORDERING INFORMATION/DESCRIPTION
The Model ꢁ00 can be ordered from this data sheet with a variety of alternate characteristics, as shown. For most rapid service on your
order, please state:
100
S
1
10K
BO1
MODEL
MOUNTING TYPE
NUMBER OF SECTIONS
Up to 6 sections
OHMIC VALUE
PACKAGING
Box of ꢁ piece
B: Bushing
S: Servo
Other characteristics will be standard as described on this data sheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time
for delivery.
SAP PART NUMBERING GUIDELINES
100
B
2
203
502
B01
MODEL
STYLE
NUMBER OF
SECTIONS
OHMIC VALUE
OHMIC VALUE
PACKAGING
Bushing
Section NO ꢁ: 20K
Section NO 2: 5K
Box of ꢁ piece
www.vishay.com
80
For technical questions, contact: sfer@vishay.com
Document Number: 57034
Revision: 28-Jun-07