1008HQ-68NXGLD

更新时间： 2024-11-06 12:35:39

品牌	Logo	应用领域
线艺 - COILCRAFT		电感器固定电感器测试射频感应器
页数	文件大小	规格书
2页	93K
描述
Chip Inductors - 1008HQ (2520)

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

1008HQ-68NXGLD 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Active	包装说明：	1211
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8504.50.80.00	风险等级：	5.16
Is Samacsys：	N	大小写代码：	1211
构造：	Chip	型芯材料：	CERAMIC
直流电阻：	0.13 Ω	标称电感 (L)：	0.068 µH
电感器应用：	RF INDUCTOR	电感器类型：	GENERAL PURPOSE INDUCTOR
功能数量：	1	端子数量：	2
最高工作温度：	140 °C	最低工作温度：	-40 °C
封装高度：	2.03 mm	封装长度：	2.92 mm
封装形式：	SMT	封装宽度：	2.79 mm
包装方法：	TR, 13 Inch	最小质量因数（标称电感时）：	80
最大额定电流：	1.1 A	自谐振频率：	1150 MHz
形状/尺寸说明：	RECTANGULAR PACKAGE	屏蔽：	NO
特殊特征：	Q MEASURED AT 350 MHZ	表面贴装：	YES
端子面层：	Silver/Palladium/Platinum - with Glass frit	端子位置：	DUAL ENDED
端子形状：	WRAPAROUND	测试频率：	50 MHz
容差：	2%	Base Number Matches：	1

1008HQ-68NXGLD 数据手册

Document 190-1

Chip Inductors

–

1008HQ (2520)

• Highest Q factors of any Coilcraft chip this body size, roughly

20% higher than our popular 1008CS and HS parts.

Coilcraft Designer’s Kit C323 contains samples of all

5% inductance tolerance parts. Kits with 2% tolerance

are also available.To order, contact Coilcraft or purchase

on-line at http://order.coilcraft.com.

• Exceptional SRFs, tight tolerance and batch consistency

Inductance³

(nH)

Percent

SRF min⁶

(GHz)

DCR max⁷

(Ohms)

Irms⁸

(A)

Part number¹

tolerance⁴

Q min⁵

1008HQ-3N0X_L_²

1008HQ-4N1X_L_

1008HQ-7N8X_L_²

1008HQ-10NX_L_

1008HQ-12NX_L_

3.0 @ 50 MHz

4.1 @ 50 MHz

7.8 @ 50 MHz

10 @ 50 MHz

12 @ 50 MHz

70 @ 1500 MHz

75 @ 1500 MHz

75 @ 500 MHz

60 @ 500 MHz

70 @ 500 MHz

8.10

6.20

3.80

3.60

2.80

0.04

0.05

0.06

1.6

1.5

5,2

1008HQ-18NX_L_

1008HQ-22NX_L_

1008HQ-33NX_L_

1008HQ-36NX_L_

1008HQ-39NX_L_

18 @ 50 MHz

22 @ 50 MHz

33 @ 50 MHz

36 @ 50 MHz

39 @ 50 MHz

5,2,1

5,2

62 @ 350 MHz

75 @ 350 MHz

65 @ 350 MHz

75 @ 350 MHz

2.70

2.05

1.70

1.40

1.30

0.07

0.09

1.4

1.3

5,2

1008HQ-47NX_L_

1008HQ-56NX_L_

1008HQ-68NX_L_

1008HQ-82NX_L_

1008HQ-R10X_L_

47 @ 50 MHz

56 @ 50 MHz

68 @ 50 MHz

82 @ 50 MHz

100 @ 50 MHz

5,2,1

5,2

75 @ 350 MHz

80 @ 350 MHz

62 @ 350 MHz

1.45

1.23

1.15

1.06

0.82

0.12

0.13

0.16

1.2

1.1

1.0

5,2

1. When ordering, specify tolerance, termination and packaging codes:

1008HQ-R10XGLC

Core material Ceramic

Terminations RoHS compliant silver-palladium-platinum-glass frit.

Other terminations available at additional cost.

Tolerance:

F = 1% G = 2% J = 5%

Weight 32.4– 35.7 mg; 17.1– 17.7 mg (Low proﬁle parts)

(Table shows stock tolerances in bold.)

Termination: L = RoHS compliant silver-palladium-platinum-glass frit.

Ambient temperature –40°C to +125°C with Irms current, +125°C

Special order: T = RoHS tin-silver-copper

to +140°C with derated current

(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).

Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic

tape (2000 parts per full reel).

Storage temperature Component: –40°C to +140°C.

Tape and reel packaging: –40°C to +80°C

B = Less than full reel. In tape, but not machine ready.

To have a leader and trailer added ($25 charge),

use code letter C instead.

Resistance to soldering heat Max three 40 second reﬂows at

+260°C, parts cooled to room temperature between cycles

D = 13″ machine-ready reel. EIA-481 embossed plastic

tape Factory order only, not stocked (7500 parts

per full reel).

Temperature Coefﬁcient of Inductance (TCL) +25 to +125 ppm/°C

Moisture Sensitivity Level (MSL) 1 (unlimited ﬂoor life at <30°C /

85% relative humidity)

2. Part is wound on low proﬁle coilform.

Failures in Time (FIT) / Mean Time Between Failures (MTBF)

3. Inductance measured using a Coilcraft SMD-A ﬁxture in an Agilent/

HP 4286A impedance analyzer with Coilcraft-provided correlation

pieces.

4. Tolerances in bold are stocked for immediate shipment.

5. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test

ﬁxture.

6. For SRF less than 6 GHz, measured using an Agilent/HP 8753D network

analyzer and a Coilcraft SMD-D test ﬁxture. For SRF greater than

6 GHz, measured using an Agilent/HP 8722ES network analyzer and a

Coilcraft SMD-D test ﬁxture.

One per billion hours / one billion hours, calculated per Telcordia SR-332

Packaging 2000/7″ reel; 7500/13″ reel

Standard height parts: Plastic tape: 8 mm wide, 0.23 mm thick,

4 mm pocket spacing, 1.8 mm pocket depth

Low proﬁle parts: Plastic tape: 8 mm wide, 0.3 mm thick,

4 mm pocket spacing, 1.6 mm pocket depth

PCB washing Tested with pure water or alcohol only. For other solvents,

see Doc787_PCB_Washing.pdf.

7. DCR measured on a Cambridge Technology micro-ohmmeter and a

Coilcraft CCF840 test ﬁxture.

8. Current that causes a 15°C temperature rise from 25°C ambient.

9. Electrical speciﬁcations at 25°C.

For part marking data, visit http://www.coilcraft.com/colrcode.cfm.

Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

Document 190-1 Revised 01/18/12

US +1-847-639-6400 sales@coilcraft.com

UK +44-1236-730595 sales@coilcraft-europe.com

Taiwan +886-2-2264 3646 sales@coilcraft.com.tw

China +86-21-6218 8074 sales@coilcraft.com.cn

Singapore + 65-6484 8412 sales@coilcraft.com.sg

This product may not be used in medical or high

risk applications without prior Coilcraft approval.

Specification subject to change without notice.

Please check web site for latest information.

中文翻译

下载PDF

与1008HQ-68NXGLD相关器件

型号	品牌	获取价格	描述	数据表
1008HQ-68NXGTD	COILCRAFT	获取价格	General Purpose Inductor, 0.068uH, 2%, 1 Element, Ceramic-Core, SMD, 1211, CHIP, 1211, ROH
1008HQ-68NXJLD	COILCRAFT	获取价格	Chip Inductors - 1008HQ (2520)
1008HQ-68NXL	COILCRAFT	获取价格	Highest Q factors of any Coilcraft chip this body size, roughly 20% higher than our popula
1008HQ-7N8	COILCRAFT	获取价格	High Q Ceramic Chip Inductors
1008HQ-7N8_	FRONTIER	获取价格	SMD WIRE WOUND CERAMIC CHIP INDUCTORS
1008HQ-7N8X_L	COILCRAFT	获取价格	Chip Inductors
1008HQ-7N8XFLB	COILCRAFT	获取价格	Chip Inductors - 1008HQ (2520)
1008HQ-7N8XFLC	COILCRAFT	获取价格	Chip Inductors - 1008HQ (2520)
1008HQ-7N8XFLD	COILCRAFT	获取价格	Chip Inductors - 1008HQ (2520)
1008HQ-7N8XGBC	COILCRAFT	获取价格	General Purpose Inductor, 0.0078uH, 5%, 1 Element

与1008HQ-68NXGLD相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

14
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

12
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

36
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

33

产品中心

服务支持

精选活动

关于我们

帮助中心

1008HQ-68NXGLD

1008HQ-68NXGLD 技术参数

1008HQ-68NXGLD 数据手册

与1008HQ-68NXGLD相关器件

与1008HQ-68NXGLD相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

1008HQ-68NXGLD

1008HQ-68NXGLD 技术参数

1008HQ-68NXGLD 数据手册

与1008HQ-68NXGLD相关器件

与1008HQ-68NXGLD相关文章

您还可以找

您在本页遇到什么问题？