Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 190-1
Chip Inductors
–
1008HQ (2520)
• Highest Q factors of any Coilcraft chip this body size, roughly
20% higher than our popular 1008CS and HS parts.
Coilcraft Designer’s Kit C323 contains samples of all
5% inductance tolerance parts. Kits with 2% tolerance
are also available.To order, contact Coilcraft or purchase
on-line at http://order.coilcraft.com.
• Exceptional SRFs, tight tolerance and batch consistency
Inductance3
(nH)
Percent
SRF min6
(GHz)
DCR max7
(Ohms)
Irms8
(A)
Part number1
tolerance4
Q min5
1008HQ-3N0X_R_2
1008HQ-4N1X_R_
1008HQ-7N8X_R_2
1008HQ-10NX_R_
1008HQ-12NX_R_
3.0 @ 50 MHz
4.1 @ 50 MHz
7.8 @ 50 MHz
10 @ 50 MHz
12 @ 50 MHz
5
70 @ 1500 MHz
75 @ 1500 MHz
75 @ 500 MHz
60 @ 500 MHz
70 @ 500 MHz
8.10
6.20
3.80
3.60
2.80
0.04
0.05
0.05
0.06
0.06
1.6
1.6
1.6
1.6
1.5
5
5
5,2
5,2
1008HQ-18NX_R_
1008HQ-22NX_R_
1008HQ-33NX_R_
1008HQ-36NX_R_
1008HQ-39NX_R_
18 @ 50 MHz
22 @ 50 MHz
33 @ 50 MHz
36 @ 50 MHz
39 @ 50 MHz
5,2,1
5,2
62 @ 350 MHz
62 @ 350 MHz
75 @ 350 MHz
65 @ 350 MHz
75 @ 350 MHz
2.70
2.05
1.70
1.40
1.30
0.07
0.07
0.09
0.09
0.09
1.4
1.4
1.3
1.3
1.3
5,2
5,2
5,2
1008HQ-47NX_R_
1008HQ-56NX_R_
1008HQ-68NX_R_
1008HQ-82NX_R_
1008HQ-R10X_R_
47 @ 50 MHz
56 @ 50 MHz
68 @ 50 MHz
82 @ 50 MHz
100 @ 50 MHz
5,2,1
5,2,1
5,2,1
5,2
75 @ 350 MHz
75 @ 350 MHz
80 @ 350 MHz
80 @ 350 MHz
62 @ 350 MHz
1.45
1.23
1.15
1.06
0.82
0.12
0.12
0.13
0.16
0.16
1.2
1.2
1.1
1.1
1.0
5,2
1. When ordering, specify tolerance, termination and packaging codes:
Core material Ceramic
Terminations RoHS compliant matte tin over nickel over silver
1008HQ-R10XGRC
platinum-glass frit. Other terminations available at additional cost.
Tolerance:
F = 1% G = 2% J = 5%
(Table shows stock tolerances in bold.)
Weight 32.4– 35.7 mg; 17.1– 17.7 mg (Low profile parts)
Ambient temperature –40°C to +125°C with Irms current
Maximum part temperature +140°C (ambient + temp rise).
Termination: R = RoHS compliant matte tin over nickel over silver-
platinum-glass frit.
L = RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel). Quantities less than
full reel available: in tape (not machine ready) or
with leader and trailer ($25 charge).
Storage temperature Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts
per full reel).
B = Less than full reel. In an effort to simplify our part
numbering system, Coilcraft is eliminating the
need for multiple packaging codes. When ordering,
simply change the last letter of your part number
from B to C.
Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 2000/7″ reel; 7500/13″ reel
Standard height parts: Plastic tape: 8 mm wide, 0.23 mm thick,
4 mm pocket spacing, 1.8 mm pocket depth
Low profile parts: Plastic tape: 8 mm wide, 0.3 mm thick,
4 mm pocket spacing, 1.6 mm pocket depth
2. Part is wound on low profile coilform.
3. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/
HP 4286A impedance analyzer with Coilcraft-provided correlation pieces.
4. Tolerances in bold are stocked for immediate shipment.
5. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
6. For SRF less than 6 GHz, measured using an Agilent/HP 8753D network
analyzer and a Coilcraft SMD-D test fixture. For SRF greater than
6 GHz, measured using an Agilent/HP 8722ES network analyzer and a
Coilcraft SMD-D test fixture.
7. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF840 test fixture.
8. Current that causes a 15°C temperature rise from 25°C ambient. This
information is for reference only and does not represent absolute
maximum ratings.
9. Electrical specifications at 25°C.
For part marking data, visit http://www.coilcraft.com/colrcode.cfm.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 190-1 Revised 08/08/22
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2022
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
5秒后页面跳转
三星深化印度制造布局，供应链本地化进程加速
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
纳微科技震撼发布GaNSlim革新氮化镓功率芯片
意法半导体发布第四代SiC技术，助力电动汽车电驱
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
