ISOLATED DC/DC CONVERTERS
48 Vdc Input
12 Vdc/18 A Output
0RX3-D2T12x
RoHS Compliant
Rev.C
Isolated
Output Over-voltage Protection
OCP/SCP
High Efficiency
High Power Density
Low Cost
Over Temperature Protection
Remote On/Off
Fixed Frequency (300 kHz)
Input Under-voltage Lockout
Input Over-voltage Lockout
Basic Insulation
Baseplate
Description
The 0RX3-D2T12x is an isolated dc/dc converter that operates from a nominal 48 Vdc source. This unit will
provide up to 216 W of output power from a nominal 48 Vdc input. This unit is designed to be highly efficient and
low cost. Features include remote on/off, over current protection and over-voltage protection. The converter is
provided in an industry standard quarter brick package.
Part Selection
Output
Input
Max. Output
Current
Max. Output
Power
Typical
Efficiency
Model Number
Active High
Model Number
Active Low
Voltage
Voltage
12 V
36 V - 75 V
18 A
216 W
95%
0RX3-D2T120
0RX3-D2T12L
Notes: 1. Add “G” suffix at the end of the model number to indicate Tray Packaging.
2. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers.
Absolute Maximum Ratings
Parameter
Min
Typ
Max
Notes
Input Voltage (continuous)
-0.3 V
-
80 V
Input voltage Transient Protection
Remote On/Off
-
-
-
-
-
-
100 V
18 V
Operating for 100mS
-0.3 V
-
I/O Isolation Voltage
1500 V
85 C
125 C
Ambient Temperature
Storage Temperature
-40 C
-55 C
Input Specifications
Parameter
Input Voltage
Min
36 V
Typ
48 V
-
Max
75 V
7.0 A
Notes
Input Current (full load)
-
-
-
Input Current (no load)
80 mA
10 mA
150 mA
20 mA
Remote Off Input Current
Tested with simulated source impedance
of 10 uH, 5 Hz to 20 MHz; use a 100 uF
/100 V electrolytic capacitor with ESR = 1
ohm max. at 200 kHz at 25 C.
Input Reflected Ripple Current (pk-pk)
-
-
20 mA
5 mA
30 mA
Input Reflected Ripple Current (rms)
10 mA
I2t Inrush Current Transient
Turn-on Voltage Threshold
Turn-off Voltage Threshold
-
-
-
1 A2s
35.5 V
-
34.5 V
33.5 V
32.5 V
Notes: 1. Should place at least 100uF/100V electrolytic capacitor directly adjacent to the input pin of the module.
2. All specifications are typical at nominal input, full load at 25 C unless noted.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com