1GBase-T 100W 4-pair
Power over Ethernet
Single, Dual and Quad Port MagJack® ICMs
The MagJack® brand of 1GBase-T 100W, 4-pair Power over Ethernet ICMs
are aimed at customers looking to upgrade their product performance for
maximum power – 100W, or 1A over standard Ethernet cable. Customers
can implement 100W PoE to basically double the amount of power their
product can handle over any existing application, while still operating
at Gigabit Ethernet speeds. These parts are backward compatible to
existing Ethernet networks. The 100W products are ideal for LED lighting
applications at both the switch side and lighting ballast side.
This product family can transmit or receive 0 to 100W of power per port
over all 4-pairs within the Ethernet cable while maintaining the bandwidth
of the Gigabit Ethernet signal. These products can be used as either a PSE
(Power Source Equipment) or a PD (Powered Device). They are compatible
with all major 1GBase-T PHYs, including the latest current-mode and
voltage-mode PHYs. The products are backward compatible to slower
speeds and lower powers as needed and use industry standard footprints
and pin-outs. These parts comply with the requirements of IEEE 802.3bz.
Features & Benefits
• 1GBase-T capable design
• 100W PoE
• Industry standard footprint & pinout
• Compatible with all known 1GBase-T current-mode and voltage-mode
PHYs on the market today
• Can be used on PoE products where 60W of power is not enough
• 1G products are footprint compatible to each other
Applications
• 5G cellular switching applications
• High power sourcing applications (low density 1GBase-T Ethernet
switches requiring up to 100W of 48V power)
• Higher bandwidth wireless access points
• High powered devices (LED lighting & Ethernet cameras that require more
than 60W of power)
• Base stations
• Large screen video display units
belfuse.com/magnetic-solutions