Document 265-1
Shielded High SRF Inductors
–
0805PS
•ꢀHigherꢀSRFꢀandꢀthanꢀourꢀotherꢀpowerꢀinductors
•ꢀHighꢀinductanceꢀwithꢀtightꢀtolerance
•ꢀExcellentꢀcurrentꢀhandlingꢀforꢀaꢀpartꢀthisꢀsize
Designer’s Kit C348 contains 6 of each part
Core material Ceramic/Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 57.6– 62.4 mg
Ambient temperature –40°C to +65°C with Irms current, +65°C to
+105°C with derated current
Storage temperature Component: –40°C to +105°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +100 to +250 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1500/7″reel; 7500/13″ reel Plastic tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 2.34 mm pocket depth
PCB washing Only pure water or alcohol recommended
L2
DCR4
max
SRF5
typ
Part
±±10 Qmin3
Isat6 Irms7
(A)
0.90 1.6
number1
(µH) at±MHz (Ohms) (MHz) (A)
1. When ordering, please specify termination and packaging codes:
1815PS-334KLC
Termination: L = RoHS compliant silver-palladium-platinum-glass
frit. Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (1500 parts per full reel).
0805PS-102KL_
0805PS-152KL_
0805PS-272KL_
0805PS-332KL_
0805PS-392KL_
0805PS-472KL_
0805PS-562KL_
0805PS-682KL_
1.0
1.5
2.7
3.3
3.9
4.7
5.6
6.8
21
21
21
21
21
21
21
21
21
21
0.14
0.18
0.35
0.50
0.74
0.85
0.91
1.37
1.51
2.04
340
265
190
180
165
155
143
118
66
0.85 1.3
0.60 0.88
0.55 0.70
0.50 0.61
0.43 0.59
0.38 0.57
0.32 0.46
0.27 0.43
0.22 0.34
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
0805PS-103KL_ 10
0805PS-153KL_ 15
34
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
0805PS-223KL_ 22
0805PS-333KL_ 33
0805PS-473KL_ 47
0805PS-683KL_ 68
0805PS-823KL_ 82
0805PS-104KL_ 100
0805PS-124KL_ 120
0805PS-154KL_ 150
0805PS-224KL_ 220
0805PS-334KL_ 330
25
25
25
28
30
32
32
32
32
32
2.48
3.00
3.85
4.42
6.00
6.96
7.51
8.33
13.71
20.53
22
17
15
12
12
0.18 0.33
0.16 0.28
0.15 0.26
0.12 0.24
0.11 0.21
2. Inductance measured at 100 kHz, 0.1 Vrms, using a Coilcraft SMD-A
fixture in Agilent/HP 4263B LCR meter.
3. Q measured on an Agilent/HP 4291 with an Agilent/HP 16193 test
fixture.
4. DCR measured on a micro-ohmmeter and a Coilcraft CCF840 test
fixture.
5. SRF measured using an Agilent/HP 8753D network analyzer and a
Coilcraft SMD-D test fixture.
9.0 0.10 0.19
7.7 0.10 0.18
5.0 0.08 0.18
5.0 0.07 0.14
3.5 0.06 0.11
6. DC current at which the inductance drops 10% (typ) from its value
without current.
7. Current that causes a 40°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 265-1 Revised 10/06/08