Document 406-1
USB 3.0 Common Mode Choke 0603
• Designedforhigh-speedUSB3.0, HDMI, SATA, IEEE1394and
LVDS applications; data rates up to 4.8 Gbit/s.
• Miniature EIA 0603 footprint; only 1.07 mm tall
• Most values provide >15 dB common mode attenuation and
>100 ohms impedance.
Designer’s Kit C384 contains 10 of each value and all values of our
1206USB and 0805USB
Core material Ferrite
Environmental RoHS compliant, halogen free
Terminations Gold over nickel over silver-palladium-glass frit
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+105°C with derated current
Storage temperature Component: –40°C to +105°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf
Common mode
Common mode
impedance typ (Ohms)
attenuation typ (dB)
Inductance2 DCR max3 Isolation Irms4
Part number1
100 MHz 500 MHz
1 GHz
100 MHz 500 MHz 1 GHz
min (nH)
(Ohms)
(Vrms) (mA)
0603USB-251ML_
0603USB-601ML_
0603USB-951ML_
0603USB-142ML_
0603USB-222ML_
25
60
95
145
225
44
99
156
242
384
64
142
234
353
592
1.31
3.00
4.62
6.85
9.14
3.16
6.88
9.75
12.80
16.53
8.45
13.27
16.06
18.16
20.29
18
37
63
98
150
0.077
0.109
0.142
0.174
0.209
250
250
250
250
250
500
500
500
500
500
0.060 0.003
1,52 0,076
1. When ordering, please specify packaging code:
0603USB-222MLC
1
2
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
0.042 0.004
1,07 0,10
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
4
3
0.004
0,10
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (7500 parts per full reel).
0.023 0.030
2. Inductance measured at 100 MHz using an Agilent/HP 4286A imped-
ance analyzer and a Coilcraft SMD-A fixture.
0.034
0,86
0.013
0,33
0,58
0,73
0.010
0,25
3. DCR is specified per winding.
4. Current per winding that causes a 20°C rise from 25°C ambient.
5. Electrical specifications at 25°C.
2
1
4
1
4
2
3
0.030 0.003
0,76 0,076
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
3
0.010
0,25
0.012
0,30
Recommended
Land Pattern
inches
mm
Dimensions are in
Weight 4.9 – 5.2 mg
Packaging 2000 per 7″reel; 7500 per 13″ reel; Plastic tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth
Document 406-1 Revised 07/20/10
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.