Document 218-1
ChipInductors-0603HCSeries(1608)
With their high current ratings and ultra-small size, these
chip inductors are ideal for today’s high frequency, low
voltage applications like mobile phones. They feature
continuous current ratings up to 2.4 Amps DC and will
handle transient currents up to 50% higher. At low
inductance values, their Q factors are also higher than
our standard 0603CS Series.
SRF
min5
DCR
Inductance2 Percent
Q
max6 Irms7 Color
900 MHz
L typ Q typ
1.7 GHz
L typ Q typ (MHz)
Part number1
(nH)
tolerance3
min4
(Ohms) (A)
code
0603HC-1N6XJL_
0603HC-3N6XJL_
0603HC-3N9XJL_
0603HC-6N8XJL_
0603HC-7N5XJL_
1.6
3.6
3.9
6.8
7.5
5
5
5
5
5
24
24
25
35
38
1.67
3.65
3.74
6.72
7.33
49
70
70
70
70
1.65
3.75
3.90
7.10
7.90
63
90
90
75
68
12500
5900
5900
5800
3700
0.030
0.048
0.054
0.054
0.059
2.4
2.3
2.2
2.1
2.1
Black
Brown
Red
Orange
Yellow
0603HC-10NX_L_
0603HC-12NX_L_
0603HC-15NX_L_
0603HC-18NX_L_
0603HC-22NX_L_
10
12
15
18
22
5,2
5,2
5,2
5,2
5,2
38
38
38
40
42
9.70
12.3
15.5
19.5
24.0
73
68
65
62
61
10.5
57
41
40
40
26
3700
3000
2800
2800
2400
0.071
0.075
0.080
0.099
0.099
2.0
2.0
1.9
1.9
1.8
Green
Blue
Violet
Gray
14.5
17.6
25.0
31.5
White
0603HC-24NX_L_
24
5,2
42
25.8
55
35.0
21
2400
0.105
1.8
Black
1. When ordering, specify tolerance, termination and packaging codes:
Designer’s Kit C339 contains 10 of each of all 5% parts
Core material Ceramic
0603HC-24NXJLW
Tolerance: G = 2% J = 5% (Table shows stock tolerances in bold.)
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Terminations RoHS compliant matte tin over nickel over silver
platinum-glass frit.
Weight 3.3 – 3.7 mg
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +145°C with derated current
Packaging: W= 7″ machine-ready reel. EIA-481 punched paper tape
(2000 parts per full reel).
U = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter W instead.
Storage temperature Component: –40°C to +155°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
2. Inductance measured at 250 MHz using Coilcraft SMD-A fixture in
Agilent/HP 4286 impedance analyzer with Coilcraft-provided correlation
pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured at 250 MHz using Agilent/HP 4291A with Agilent/HP 16193
test fixture.
Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
5. SRF measured using Agilent/HP 8720D network analyzer and Coilcraft
SMD-D test fixture.
Failures inTime (FIT) / MeanTime Between Failures (MTBF)
One per billion hours / one billion hours, calculated perTelcordia SR-332
6. DCR measured on micro-ohmmeter and Coilcraft CCF858 test fixture.
7. Current that causes a 20°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Packaging 2000 per 7″ reel. Paper tape:8 mm wide, 1.0 mm thick,
4 mm pocket spacing
PCB washing Only pure water or alcohol recommended
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Specifications subject to change without notice.
Please check our website for latest information.
Document218-1 Revised10/03/08
© Coilcraft, Inc. 2009