Document 422-1
Chip Inductors
–
0402AF Series (1005)
•ꢀHigherꢀinductanceꢀvaluesꢀthanꢀotherꢀ0402ꢀinductors
•ꢀFerriteꢀconstructionꢀforꢀhighꢀcurrentꢀhandling
•ꢀ23ꢀinductanceꢀvaluesꢀfromꢀ20ꢀnHꢀtoꢀ560ꢀnH
Impedance typ (Ohms)
Inductance2
±±5 (nꢀ)
SRF typ3
(Mꢀz)
DCR max4
(Ohms)
Irms5
(mA)
Part number1
900 Mꢀz
1.7 Gꢀz
0402AF-200XJL_
0402AF-220XJL_
0402AF-330XJL_
0402AF-360XJL_
0402AF-390XJL_
20
22
33
36
39
83
96
142
157
173
118
146
207
249
263
2600
2500
2300
2300
2200
0.050
0.065
0.060
0.075
0.115
1600
1300
1400
1300
830
0402AF-510XJL_
0402AF-560XJL_
0402AF-720XJL_
0402AF-780XJL_
0402AF-101XJL_
51
56
218
239
311
344
513
330
360
453
522
850
1930
1900
1650
1600
1400
0.070
0.095
0.100
0.130
0.160
1100
1000
1000
970
72
78
100
900
0402AF-141XJL_
0402AF-181XJL_
0402AF-201XJL_
0402AF-221XJL_
0402AF-251XJL_
140
180
200
220
250
629
832
1110
1050
1230
949
1270
1890
1560
1940
1220
1150
1000
1150
900
0.260
0.280
0.440
0.530
0.360
630
560
400
380
520
0402AF-271XJL_
0402AF-301XJL_
0402AF-331XJL_
0402AF-361XJL_
0402AF-391XJL_
270
300
330
360
390
1320
1550
1850
1920
2350
1960
2230
2880
2640
2970
860
860
820
810
760
0.550
0.410
0.560
0.575
0.750
360
420
350
360
300
0402AF-421XJL_
0402AF-471XJL_
0402AF-561XJL_
420
470
560
2270
2680
3620
2800
3010
3110
700
650
600
0.700
0.730
0.920
340
310
200
1. When ordering, please specify termination and packaging codes:
0402AF-±61XJLW
Designer’s Kit C397 contains 20 each of all values
Core material Ferrite
Terminations RoHS compliant gold over nickel over silver-palladium-
Termination: L = RoHS compliant gold over nickel over silver-palladi-
um-glass frit.
glass frit. Other terminations available at additional cost.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Weight 0.9 – 1.1 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+100°C with derated current
Packaging: W= 7″ machine-ready reel. EIA-481 punched paper
tape (2000 parts per full reel).
Q = 7″ machine-ready reel. EIA-481 punched paper
Storage temperature Component: –40°C to +100°C.
tape (5000 parts per full reel).
Tape and reel packaging: –40°C to +80°C
U = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter W instead.
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
2. Inductance measured at 7.9 MHz, 0.1 Vrms, using an Agilent/HP
4286A LCR meter or equivalent with a Coilcraft SMD-F test fixture and
Coilcraft-provided correlation pieces.
3. SRF measured using Agilent/HP 8753D network analyzer and Coilcraft
SMD-D test fixture.
4. DCR measured on Cambridge Technology micro-ohmmeter and a
Coilcraft CCF858 test fixture.
5. Current that causes a 15°C temperature rise from 25°C ambient.
Because of their open construction, these parts will not saturate.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Temperature Coefficient of Inductance (TCL) +25 to +150 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 2000 or 5000 per 7″ reel. Paper tape: 8 mm wide,
0.68 mm thick, 2 mm pocket spacing
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Document 422-1 Revised 12/17/12
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.