0.1MS4A_1.5UP Series
0.1W - Single Output DC-DC Converter - Fixed Input - Isolated & Unregulated
DC-DC Converter
0.1 Watt
Efficiency up to 81%
1500VDC isolation
Power density 0.36W/cm3
Industry standard pinout
RoHS compliance
MTBF >1,000,000 hours
UL 94V-0 package material
The 0.1MS4A_1.5UP series are miniature, isolated 0.1W DC/DC
converters in a SIP package. They offer the ideal solution in many space
critical applications for board level power distribution. The internal SMD
construction makes it possible to offer a product with high performance
at low cost. The series offers smaller size, improved efficiency.
Operating temperature range:
-40°C ~ +105°C
Short circuit protection (SCP)
Common specifications
Output specifications
Short circuit protection:
continuous
Item
Test condition
10% of full load
Min
Typ
Max
Units
Case temperature rise above ambient: +35°C max. 0505 & 1205
Minimum load
Cooling:
Free air convection
-40°C~+105°C
Voltage set point
accuracy
2
W
%
Operation temperature range:
Storage temperature range:
Lead temperature:
Storage humidity range:
Case material:
Line regulation
Load regulation
High to low Vin ( 5%)
1.2
-50°C ~+130°C
10% to 100% load
• 3.3V output & 0309
• 5V output
300°C MAX, 1.5mm from case for 10 sec
< 95%
15
15
10
10
9
%
%
%
%
%
• 9V output
Non-conductive plastic [UL94-V0]
>1,000,000 hours
1.09g
• 12V output
•15V output
MTBF (MIL-HDBK-217F @25°C):
Weight:
Output voltage
accuracy
See tolerance envelope graph
Temperature drift
Ripple & Noise*
100% full load
0.05 %/°C
Input specifications
20MHz Bandwidth
50
100
mVp-p
KHz
Item
Test condition
Min
Typ
Max
Units
Switching frequency Full load, nominal input
120
Voltage range
• 3.3V input
• 5V input
• 12V input
2.9
4.5
11
3.3
5
12
3.6
5.5
13.3
V
V
V
* Measured with 1uF ceramic capacitor connect to the output pins.
input voltage
Absolut max. rating
• 3.3V input
Example:
5.5
7
15
V
V
V
0.1MS4A_0505S1.5UP
• 5V input
0.1 = 0.1 Watt; MS4 = Micro SIP4; A = Pinning; 05 = 5 Vin; 05 = 5Vout;
S = Single Output; 1.5 = 1.5kVDC Isolation; U = Unregulated;
P = Short circuit protection
• 12V input
Internal filter
Capacitor
No load current
13mA
Max
Note:
1. Operation under minimum load will not damage the converter; However, they
may not meet all specification listed, and that will reduce the life of product.
2. All specifications measured at Ta = 25°C, humidity <75%, nominal input voltage
and rated output load unless otherwise specified.
Isolation specifications
Item
Test condition
Tested for 10sec.
Test at 500VDC
Min
1500
1
Typ
Units
VDC
GΩ
Isolation voltage
Isolation resistance
3. Only typical models listed, other models may be different, please contact our
technical person for more details.
4. In this datasheet, all the test methods of indications are based on corporate
standards.
Page 1 of 3
0.1MS4A_1.5UP – Rev. 2020-1.2
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com