0.1D14B_3UP Series
0.1W - Single/Dual Output - Fixed Input - Isolated & Unregulated
MINIATURE SIP PACKAGE
DC-DC Converter
0.1 Watt
Efficiency up to 83%
Small footprint from 1.17cm2
SIP package
Industry standard pinout
UL94-V0 package
No heat sink required
Power density 0.85W/cm3
RoHS compliance
The 0.1D14B_3UP Series are specially designed for applications where a
single power supply is isolated from the input power supply in a distribu-
ted power supply system on a circuit board.
Single/dual output voltage
3KVDC isolation
These products apply to:
Temperature range:
-40°C~+105°C
1) Where the voltage of the input power supply is fixed
(voltage variation ≤ 10ꢀ)ꢁ
2) Where isolation is necessary between input and output
(isolation voltage =3000VDC)
3) Where the regulation of the output voltage and the output ripple and
noise are not demanding, such as: purely digital circuits, ordinary low
frequency analog circuits and IGBT power device driven circuits, etc.
Common specifications
Short circuit protection:
Temperature rise at full load:
Cooling:
Output specifications
Continuous, automatic recovery
25°C MAX, 15°C TYP
Item
Test condition
Min
Typ
Max
0.1
Units
W
Rated power
Line regulation
Load regulation
Free air convection
High Vin to low Vin
1.32
ꢀ
Operation temperature range:
-40°C~+105°C
Derating if the temperature ≥85°C
10ꢀ to 100ꢀ full load
• 3.3V/5V types
• Other
8
6
ꢀ
ꢀ
Storage temperature range:
Storage humidity range:
Lead temperature:
Case material:
-55°C ~+130°C
Output voltage
accuracy
See tolerance envelope
95ꢀ MAX
300°C, 1.5mm from case for 10 seconds
Plastic [UL94-V0]
>3,500,000 hours
2.11g
Temperature drift
Ripple & Noise
100ꢀ full load
0.03 ꢀ/°C
20MHz Bandwidth
75
mVp-p
MTBF (MIL-HDBK-217F@25°C):
Weight:
Switching frequency Full load, nominal input
• 3.3V input types
95
KHz
KHz
KHz
KHz
• 5V input types
120
145
90
140
180
180
• 12V input types
• 15V input types
Input specifications
Item
Test condition
Min
Typ
Max
Units
Voltage range
• 3.3V input types
• 5V input types
• 12V input types
• 15V input types
2.9
4.4
11
3.3
5
12
15
3.6
V
V
V
V
5.6
Example:
13.3
16.4
0.1D14B_2405S3UP
13.4
0.1= 0.1Watt; D14= DIP14; B= Pinning; 24Vin; 5Vout; S= Single Output;
3=3kVDC; U= Unregulated Output; P= Short Circuit Protection
Isolation specifications
Item
Test condition
Min
Typ
Max
Units
VDC
GΩ
Note:
Isolation voltage
Isolation resistance
Input to Output (1sec) 3000
Test at 1000VDC
1. All specifications measured at TA=25°C, humidity < 75ꢀ, nominal input voltage
and rated output load unless otherwise specified.
1
2. See below recommended circuits for more details.
Page 1 of 3
0.1D14B_3UP – Rev. 2017-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com